Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
. Press the OK key. Auto Scanning menu will be displayed. All the channels in the list will be automatically downloaded. 1.3 Manual Scanning To tune-in new channels and weak been provided with the option “ Manual Scanning” where the channel data can be entered by the user. After selecting the “ Manual Scanning” from the Installation Menu, the following screen will be displayed: . Select the Channel Number. You can select the specified channel you want to find. The followings are defined as a default, but optionally you can choose it. Signal Status bar shows you if it is valid. . Input the frequency of the channel you want to find. . Select the bandwidth. You can select the value of 6, 7 or 8 MHz. . Select the Guard Interval Mode. You can select the value of Auto, 1/32, 1/16, 1/8, or 1/4. . Select the FFT (Fast Fourier Transform) Mode. The value of AUTO, 2K and 8K is settings automatically. . After select option, press the OK key to start the scanning process. 1.4 Reset to Factory Defaults This is to restore the factory set values in case the user has encountered some problems after changing any values of channel data and others which may be in error. At the request window, if you press the OK key, the receiver will be reset to factory default settings automatically. Note : This cause your previous settings to be deleted! Digital Terrestrial Receiver GB-16 GB-17 GB OPERATING THE RECEIVER OPERATING THE RECEIVER 2. Channel Organising The “ Channel Organising” menu has four functions: The “ Channel Organising” menu is used to delete the Frequencies and Channels or move&edit . Enter the PIN Code. If you have not entered your own PIN Code 0000 applies, which was set at the factory. 2.1 Delete Frequency . Select the desired frequency list you want to delete by pressing the RED key. . Press the OK key for confirmation. Note : This feature doesn’t delete frequency itself but deletes the list of channels registered for frequency. 2.2 Delete Channel . Select the desired channel you want to delete by pressing the RED key. . Press the OK key for confirmation. 2.3 Delete All Channels At the request window, press the OK key to delete all channels and press the EXIT key to exit. 2.4 Move & Edit Channel . Select the TV/RADIO/Interactive list / keys. . Select the TV/RADIO/Interactive list with / or CH+/CHkeys. . Select channel by pressing the RED key. . Press the / keys to change the position of the channel you want, and CH+/CH- for moving up or down pages on list. Press the OK key for confirmation. . If you want to return the channel to the initial position, do not press the OK key but press the BLUE key. To edit Channel Name . Select the TV/RADIO/Interactive list with / keys. . Select a channel list to move to other location with / or CH+/CH- keys. . Press the GREEN key. Font Table will be displayed. . Select desired character with / , / and then press the OK key to paste character to the string. Note :CH-key : Backspace for deleting previous character. . Press the MENU key and then press the OK key to save the set data. GB Digital Terrestrial Receiver GB-18 GB-19 OPERATING THE RECEIVER OPERATING THE RECEIVER 3. Parental Lock This “ Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your the PIN (Personal Identification Number), which (The factory preset PIN Code : 0000) On selecting this menu, you will have three options: to set lock for any desired channel and to change your PIN Code and to Set Modem Lock. . Enter PIN Code. If you have not entered your own PIN Code then the PIN Code 0000 applies, which was set at the factory. 3.1 Set Channel Lock . Select the channel by pressing the / or / keys. . Select the channel lock by pressing the RED key. . Press the OK key for confirmation. Whenever you need to view the locked channel, you will have to enter the PIN Code at the request window. After entering PIN Code to able to access a parental locked channel, it will work on all parental locked channels. It means that you can access all parental locked channels with entering PIN Code on any parental locked channel successfully. To cancel the lock : . Press the RED key again in order to cancel the lock. 3.2 Change PIN Code To change the PIN Code, select the “ Change PIN Code”. This will take you to the following menu: In this option, you need to enter the current PIN Code at the first cursor, and at the second cursor enter the desired PIN Code. To confirm, you need to enter the new PIN Code again. Please remember the PIN Code should be a 4 digit numerical value. THE FACTORY PRESET PIN CODE : 0 0 0 0. Note : If you forget the PIN Code, contact your dealer or service provider. Once you change password, please do not forget and keep well. 3.3 Set Modem Lock To block watching the paid-service, e.g. PPV(Pay Per View) service, select the third option, “ Set Modem Lock”. You can select Lock or Unlock in Modem Parental Lock Menu. . Select Lock, this will make you block to watch paid-se...
Otros modelos de este manual:El receptor y el amplificador - DTB-S500F (3.07 mb)