Votos - 3, Puntuación media: 3.3 ( )

Fabricar: Nady Systems Tamaño del archivo: 844.02 kb Nombre del archivo: Idioma del manual:

An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit. CAUTION! TO REDUCE THE RISK OF FIRE, RE PLACE ONLY WITH SAME TYPE FUSE. ATTENTION! UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE. WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. 3 GEQ 131/131LF Single Channel 31 Band Graphic Equalizers GEQ 215/215LF 2 Channel 15 Band Graphic Equalizers GEQ 231 2 Channel 31 Band Graphic Equalizer Graphic Equalizer GEQ Series POWER +12 10 +6 -6 +3 -3 0 -12 0 LEVEL 5 31 BAND GRAPHIC EQUALIZER GEQ 131LF OFF ON BYPASS CLIP –6 –12 RANGE 40 15 60 10 250 HI PASS 15K 7K 22K 3K 50K LOW PASS 20 25 31.5 40 50 63 80 100 125 160 200 250 315 400 500 630 800 1K 1.25K 1.6K 2K 2.5K 3.15K 4K 5K 6.3K 8K 10K 12.5K 16K 20K INSTALLATION To ensure years of enjoyment from your NADY AUDIO graphic equalizer, please read and understand this manual thoroughly before using the unit. These five equalizer models are each designed for mounting in a standard 19" equipment rack or one of the many rack type portable cases available on the market. The units are either single rack (1.75") or double rack (3.5") as noted. All five models are 8.66 inches deep. Install the equalizer in a rack with the rack screws provided. Route the A.C. power cord to a convenient power outlet away from audio lines. The unit may be turned on and off from the front panel power switch or a master equipment power switch. Since the unit draws a relatively small amount of current during idle, the unit may be left on continuously. NADY AUDIO equalizers do not generate an unduly large amount of heat and do not need to be specially ventilated or cooled. The units should not be subjected, however, to high heat environments. Although the unit’s chassis is shielded against radio frequency (RF) and electromagnetic interference (EMI), extremely high fields of RF and EMI should be avoided. Input/Output Connections The 1/4" phone jack, RCA jack, and XLR connector inputs and outputs can be used for balanced and unbalanced connections. CAUTION: Using more than one connector at a time for the INPUT/OUTPUT pair could unbalance balanced lines, cause phase cancellation, short a conductor to ground, or cause damage to the other equipment connected to the equalizer. For balanced connection, For unbalanced operation, wire the connectors as follows: wire the connectors as follows: Power Connection Each of these five NADY AUDIO graphic equalizers is designed for operation from 120-240 volts, 50-60 Hz AC supplies. Power requirements for electrical equipment differ from area to area. In new installations and portable sound systems, or any situation in which the AC power is in question, it is wise to confirm the voltage and select the appropriate line voltage switch before connecting the instrument to power sources. Check to see that the unit is set to the voltage for your area by referring to the table below: Europe (except UK): 230V, 50Hz UK and Australia: 240V, 50Hz USA and Canada: 120V, 60 Hz For other areas, please check with local authorities. VOLTAGE SELECTOR 115V 230V 120V 240V If the voltage selector is not set for your area: Confirm that the power cord is not plugged into a wall outlet. Move the voltage selector switch with a small screwdriver so that the marker is set to the voltage for your area. Paralleling inputs and outputs may be accomplished by using any of the 3 connectors. Note: The 1/4" TRS are normally used for this function. Precautions Protecting yourself from electric shock: • Never touch the plug with wet hands. • Always pull out by the plug and never the cord. • Only let a qualified professional repair the equipment. An unauthorized person might touch the internal parts and receive a serious electric shock. • Never allow a child to put anything, especially metal, into the equipment. Protecting your NADY AUDIO Graphic Equalizer: • Use only a household AC power source. Never use a DC power source. • If water is spilled on or in the unit, unplug it and call for service. • Make sure that the equipment is well ventilated and away from direct sunlight • Avoid damage to the internal circuits and the external surface by keeping the unit away from sources of high heat. • Avoid using spray type insecticide or solvents near the equipment. It can damage the finish an might ignite suddenly • To avoid damaging the finish, never use denatured alcoh...

Descargar ahora

Introduzca dos números de la imagen: