Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
With C-COMPVGA-HDMI converter, Component and/or VGA based devices such as PC, set-top-boxes can connect to HDMI TV or projector at low cost. - HDMI 1.2a compliant - Support VGA resolution of up to UXGA (1600x1200 or WUXGA (1920x1200) - Supports HD (1080i / 720p) component video - Coaxial S/PDIF audio input - Stereo analog audio input - Front panel LED indicators - Easy installation 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - C-COMPVGA-HDMI x 1 - Power Adapter (+5VDC, 2A) x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.7 Panel Description 1.7.1 Front Panel 1 2 3 4 1. S/PDIF IN 2. STEREO IN 3. Component or VGA IN 4. Component or VGA Select Button 1.7.2 Rear Panel 1 2 3 4 1. Mode Switch 2. HDMI OUT 3. Power Indicator 4. 5V DC Power Jack 1.7.3 DIP Switch PIN # Mode 1 OFF . Reset to Factory default EDID 1 ON . Learn & store connected monitor’s EDID 2 OFF . Analog Audio Input 2 ON . S/PDIF Audio Input 1.8 Installation To setup Avenview C-COMPVGA-HDMI follow these steps for connecting to a device: 1. Power off display source such as DVD Player, Set-top box, PC etc. 2. Connect VGA or Component source to the video input 3. Connect S/PDIF or Stereo Audio source to RCA Jack or 3.5mm Jack 4. Connect VGA/Component Adapter to VGA or Component input of the device 5. Connect HDMI cable to device and TV or projector 6. Plug in 5V DC power cord to power jack of C-HDMI-COMPVGA 7. Power on C-COMPVGA-HDMI converter 8. Power on VGA / Component source and display with HDMI input. S/PDIF format is dependent on the embedded digital audio part in the HDMI stream. The S/PDIF receiver must be able to recognize the input S/PDIF format. C-HDMI-DVIA only separates the digital audio in HDMI stream and bypasses this decoded audio to the output. This version does NOT support 8 Channel analog audio applications S/PDIF audio input can support 2 out of 8 channel audio inputs. S/PDIF audio only supports 48 KHz audio sample rate. Section 2: Specifications Item Description Units C-COMPVGA-HDMI Unit Description Component/VGA with Audio to HDMI Converter HDMI Compliance HDMI 1.2a Video Bandwidth 165MHz (4.95Gbps) Video Support Single Link: 1080p 60, WUXGA (1920x1200@60Hz) Component Video: 720p / 1080i Audio Support Stereo Audio Output Video Signal 1.2 Volts (peak-to-peak) Output DDC Signal 5 Volts (peak-to-peak, TTL) Input 1 x VGA 1 x RCA 1 x 3.5mm Output HDMI x 1 HDMI Connector Type A (19 pin female) VGA Connector HD-15 (15-pin D-sub female) RCA Connector Coaxial S/PDIF Digital Audio (PCM 48kHz) 3.5mm Audio Connector Analog Stereo Audio Dimensions (L x W x H) 5” X 4” x 1” Power Supply 5V 2A DC Power Consumption 4 Watts (max) Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) 2.1 Supported Resolutions 2.1.1 VGA Supported Mode Resolution VESA 640x400 @85Hz VESA 720x400 @85Hz VESA 640x480 @60Hz VESA 640x480 @72Hz VESA 640x480 @75Hz VESA 640x480 @85Hz VESA 800x600 @60Hz VESA 800x600 @72Hz VESA 800x600 @75Hz VESA 800x600 @85Hz VESA 1024x768 @60Hz VESA 1024x768 @75Hz VESA 1024x768 @85Hz Supported Mode Resolution VESA 1152x864 @60Hz VESA 1152x864 @75Hz VESA 1152x864 @55Hz VESA 1280x768 @60Hz VESA 1280x768 @75Hz VESA 1280x768 @85Hz VESA 1280x960 @60Hz VESA 1280x960 @85Hz VESA 1280x1024 @60Hz VESA 1280x1024 @85Hz VESA 1600x1200 @60Hz VESA 1920x1200 @60Hz 2.1.2 Component Video (YPbPr) Supported Mode Resolution EIA 720x480p @59.94 (60)Hz EIA 720x576p @ 50Hz EIA 1280x720p @59.94 (60)Hz EIA 1920x1080i @59.94 (60)Hz NTSC 712x484 PAL 702x574 Notice 1. Only HDMI enabled TV sets with under-scan/over-scan support, the full active video can be accurately displayed. Some HDMI equipped TV sets may not support this feature. If under-scan/over-scan* is NOT supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF audio may not sound right. 2. Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel analog audio applications. 3. S/PDIF audio input supports the main 2-channel audio input 4. S/PDIF supports only 48kHz audio sample rate. Other than this rate, the input digital audio should be adjusted to 48kHz in order to get audio signal correctly sent. The under-scan mode displays the full video frame, which reveals content on the edge that is recorded. In overs-can, the field monitor zooms in to the area that would be visible on most televisions. Set the field monitor to under-scan if you...