Fabricar: Transition Networks Tamaño del archivo: 79.23 kb Nombre del archivo: Idioma del manual:

Enlace gratuito para este manual disponible en la parte inferior de la página

Media converter models are selected according to the fiber mode and fiber connector required at the site. Multimode fiber-optic cable can use either an ST connector (E-100BTX-FRL-01) or an SC connector (E-100BTX-FRL-01 (SC)). Singlemode fiber (E-100BTX-FRL-01 (SM)) uses only an SC connector. All media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode. E-100BTX-FRL-01 Provides an RJ-45 unshielded twisted pair '100BASE-TX connector and a set of RX (receive) and TX (transmit) ST 100BASE-FX connectors to multimode fiber-optic cable. e-ioobtx-frl-oi E-100BTX-FRL-01(SC) Provides an RJ-45 unshielded twisted pair '100BASE-TX connector and an RX (receive) and TX (transmit) SC 100BASE-FX COnneCtOr tO multimode Multimode Fiber fiber-optic cable. e-ioobtx-frl-oi(sc) E-100BTX-FRL-01(SM) Provides an RJ-45 unshielded twisted pair 100BASE-TX connector and an RX (receive) and TX (transmit) SC 100BASE-FX connector to singlemode fiber-optic cable. Status LEDs on the connector side of the media converters provide the following information: Pwr (Power) Illuminated green LED indicates connection to external AC power. RX (Receive) Flashing green LED indicates port is receiving data. Link Steady green LED indicates port is receiving link signal. I 2 9 ¿ Ï i J 2 1 . i* 1 r, is 1 Ethernet" 100BASE-TX Media Con 100BASE-FX T i i Multimode Fiber UTP ITE)-——-...

Otros modelos de este manual:
El receptor y el amplificador - MEDIA CONVERTERS E-100BTX-FRL-01 (79.23 kb)
El receptor y el amplificador - MEDIA CONVERTERS E-100BTX-FRL-01(SM) (79.23 kb)

Descargar ahora

Introduzca dos números de la imagen: