Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
1 AM loop antenna (N1DAAAA00001) . 1 FM indoor antenna (RSA0007-J) . 1 System cable (K1HA25HA0001) . 5 Speaker cables 3k4-m (13-foot) cables (REE1247A) 2k10-m (33-foot) cables (REE1247C) \U.S.A.\and\Canada] . 1 Antenna plug (K2RC021B0001) [For\areas\except\U.S.A.\and\Canada] . 1 Power plug adaptor (K2DA42E00001) [Note] The included AC power supply cord is for use with this unit only. Do not use it with other equipment. The laser product label has not been attached to products for (Inside of product) the U.S.A. and Canada (Back of product) Accessories Simple setup STEP1 Locating 1 FRONT (L, R) How you set up your speakers can affect the bass and the sound field. Note the following points. .Place speakers on flat secure bases. .Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains. .The left and right speaker pairs are the same with respect to the front and surround speakers. 2 SURROUND (L, R) .Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. 131242Setup example Main unit .Use only supplied speakers Using other speakers can damage the unit and sound quality will be negatively affected. .Set the speakers up on an even surface to prevent them from falling. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface. Main unit [Note] Keep your speakers at least 10 mm (13/32q) away from the system for proper ventilation. Center speaker .Vibration caused by the center speaker can disrupt the picture if it is placed directly on the television. Put the center speaker on a rack or shelf. .To prevent the speakers from falling, do not place directly on top of the television. Subwoofer Place to the right or left of the television, on the floor or a sturdy shelf so that it won’t cause vibration. Leave 10 cm (4q) at the rear for ventilation. Caution .Hold the speakers by the sides. Applying pressure to the front net can damage the speaker. RQT7433 34 CENTER SUBWOOFER Notes on speaker use .You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. .Reduce the volume in the following cases to avoid damage. – When playing distorted sound. – When the speakers are receiving howling from a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. – When adjusting the sound quality. – When turning the unit on or off. If irregular coloring occurs on your television The supplied speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations. If this occurs, turn the television off for about 30 minutes. The television’s demagnetizing function should correct the problem. If it persists, move the speakers farther away from the television. Caution .The main unit and supplied speakers are only to be used as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. .Do not attempt to attach these speakers to walls using methods other than those described in this manual. Locating 4 Other speaker setup options . Attaching to a wall 1 Drive a screw (not included) into a wall. 30–35 mm (13/16q–13/8q) 2 Fit the speaker securely onto the screw(s) with the hole(s). .The wall or pillar on which the speakers are to be attached should ‰7.5–9.4 mm (19/64q–3/8q) be capable of supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when attaching the speakers to a 8–11 mm (3/8q–7/16q) wall. Improper attachment may result in damage to the wall and Wall or pillar speakers. e.g. Front speaker So that the speaker fits up against the wall squarely, be sure to press the speaker cable down into the groove. 110 mm (411/32q) Center speaker In this position, the speaker will likely fall if moved to the left or right. Move the speaker so the screw is in this position. . Fitting speaker stands (not included) Ensure the stands meet these conditions before purchasing them. Observe the diameter and length of the screws and the distance between screws as shown in the diagram. .The stands must be able to support over 10 kg (22 lb.). .The stands must be stable even if the speakers are in a high position. RQT7433 Other speaker setup options 60 mm (223/64z) Speaker stand (not included) Plate thickness plus 7 to 10 mm (plus 9/32z to 25/64z) Front speaker e.g. 5 mm (13/64z), pitch 0.8 mm (1/32z) Attach the stands to these metal screw holes. 5 6 RQT7433 Connecting speakers with the subwoofer .Attach the speaker-cable stickers to make connection easier. .The terminals of the subwoofer have high output power. Carefully connect the speaker wires. [Note] .Never sho...