Votos - 5, Puntuación media: 4.6
(
)
)
|
Otros manuales para este modelo:
El receptor y el amplificador - STR-DE697 (597.65 kb)
El receptor y el amplificador - STR-DE697 (375.49 kb)
Resumen del manual
Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, proceed to “2: Connecting the antennas” (page 14). Connectable components Component to be connected Page DVD player With digital audio outputa) 7-8 With multi channel audio outputb) 10-11 With analog audio output onlyc) 7-8 TV monitor With component video inputd) 8 or 11 With S-video or composite video input only 13 Satellite tuner With digital audio output3-1 7-8 With analog audio output onlyc-* 7-8 Super Audio CD/CD player With digital audio outputa) 9 With multi channel audio outputb) 10 With analog audio output onlyc) 12 MD/Tape deck With digital audio outputa) 9 With analog audio output onlyc) 12 Multi channel decoder 10 VCR, video camera, video game, etc. 13 a) Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUTjack, etc. b) Model with a MULTI CH OUTPUTjacks, etc. This connection is used to output the audio decoded by the component’s internal multi channel decoder through this receiver. c) Model equipped only with AUDIO OUT L/Rjacks, etc. d) Model with component video (Y, Pb/Cb/B-Y, Pr/Cr/R-Y) inputjacks. continued 5 us Getting Started Required cords The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (0 to H) (not supplied). A Audio cord White (L) сСЭе Red (R) сДГ B Audio/video cord Yellow (video) White (L/audio) Red (R/audio) H Video cord Yellow Q Coaxial digital cord ^ mim== G Monaural audio cord Black D S-video cord О =c®> iisiCZB Q Optical digital cord Tip Audio cord 0 can be torn into two monaural audio cords 0. H Componentvideocord (Except for models of area code CEL, CEK) Green Blue Red Notes ■ Turn off the power to all components before making any connections. ■ Be sure to make connections firmly to avoid hum and noise. ■ When connecting an audio/video cord, be sure to match the color-coded pins to the appropriatejacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red. ■ When connecting optical digital cords, insert the cord plugs straight in until they click into place. ■ Do not bend or tie optical digital cords. If you have Sony components with CONTROL A1II jacks (Except for models of area code CEL, CEK) See “CONTROL A1II Control System” on page 42. 6 us 1a: Connecting components with digital audio output jacks Hooking up a DVD player or satellite tuner For details on the required cords (0-0), see page 6. 1 Connect the audio jacks. DVD player OUTPUT Q □ to AUDIO IN DVD E=T gp w VIDEO OUT VIDEO IN S-VIDEO S-VIDEO AUDIO OUT AUDO IN CTRL A1 II' O E □ OUTPUT Satellite tuner Note Y ou can also listen to the sound of your TV by connecting your TV’s audio output jacks to the VIDEO 2 AUDIO IN jacks on the receiver. In this case, do not connect the TV’s video outputjack to the VIDEO 2 VIDEO IN jack on the OPTICAL VIDtO IN VIDEO IN DVD IN L : 0») IKO L : 0») (KO MULTI CH IN ■OZl continued 7 US Getting Started 2 Connect the video jacks. (Except for models of area code CEL, CEK) The following illustration shows how to connect a satellite tuner and a DVD player with COMPONENT VIDEO (Y, Pb/Cb/B-Y, Pr/Cr/R-Y) outputjacks. Connecting a TV with component video inputjacks allows you to enjoy higher quality video. Tip When using the S-videojacks instead of the video jacks, your monitor must also be connected via an S-videojack. S-video signals are on a separate bus from the video signals and will not be output through the video jacks. Note On this receiver, the standard video signals cannot be converted to S-video or component video signals (or vice versa). 8 us Hooking up an MD/Tape deck or a Super Audio CD/CD player For details on the required cords (0-0), see page 6. MD/Tape deck OPTICAL Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies. Notes • You cannot make digital recordings of digital multi channel surround signals. • It is not possible to record analog signals to components connected to the MD/TAPE OUT or VIDEO 1 OUT jacks if you make only digital connections. Likewise, you cannot record digital signals if you make only analog connections. To record analog signals, make analog connections. To record digital signals, make digital connections. • The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the SA-CD/CD OPTICAL IN or SA-CD/CD COAXIAL IN jack on this receiver. Connect to the analog inputjacks (SA-CD/CD IN jacks). Refer to the operating instructions supplied with the Super Audio CD player. 9 us Getting Started 1b: Connecting components with multi channel output jacks 1 Connect the audio jacks. If your DVD or Super Audio CD player is equipped with multi channel outputjacks, you can connect it to this r...