Votos - 4, Puntuación media: 3.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Press SPK SEL. button to select the speaker you want. • Each time you press this button, F.SPK .C.SPK .S.SPK .SW SPK . CROVR .SPK MODE OFF will be selected in turn. Press …† button to set the speaker mode. To Exit Setup Mode • Wait for about 5 seconds or press the SPK SEL. button of the remote control to select SPK MODE OFF. To turn the SUBWOOFER On or Off. Press SUBWOOFER button. • Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn. • If you play in 2 Channel Stereo, select 'YES' to use Subwoofer and 'NO' not to use. v • If F.SPK is set to ‘SMALL’, SW SPK is fixed to ‘YES’. 1 2 REMOTE CONTROL 17 GB Set the distance from the speaker to listening position in intervals of 0.3m. • F.L (Front-Left) : 0feet ~ 5feet • CEN (Center) : 0feet ~ 5feet • F.R (Front-Right) : 0feet ~ 5feet • S.R (Surround-Right) : 0feet ~ 15feet • S.B (Surround Center): 0feet ~ 15feet • S.L (Rear-Left): 0feet ~ 15feet • SW (Subwoofer): 0feet ~ 5feet 20 Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 2 times. • “DISTANCE SETUP” appears on the display. Press SURROUND button to select the speaker you want. • Each time you press this button, F.L .CEN .F.R .S.R .S.L .S.W will be selected in turn. Press SELECT( ) button to set the speaker distance. • For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to listening position between 0.0~1.5m in intervals of 0.3m. • For S.R, S.L Speaker, you can set the distance from the speaker to listening listening position between 0.0~4.5m in intervals of 0.3m. Setting Speaker Distance To Exit Setup Mode • Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. “SETUP MODE OFF” appears on the display and exit Setup Mode. MAIN UNIT 1 2 4 3 , OPERATION Setting the Speaker Listening Distance Press the SPEAKER DISTANCE button to select the speaker you want. • Each time you press this button, F.L .CEN .F.R .S.R .S.L .S.W . DISTANCE OFF will be selected in turn. Press …† button to set the speaker distance. • For F.L, CEN, F.R, S.W Speaker, you can set the distance from the speaker to listening position between 0.0~1.5m in intervals of 0.3m. • For S. R, S.L Speaker, you can set the distance from the speaker to listening listening position between 0.0~4.5m in intervals of 0.3m. To Exit Setup Mode • Wait for about 5 seconds or press the SPEAKER DISTANCE button of remote control to select DISTANCE OFF. v • If the listening position is beyond the range of speaker distance setup when you place the speaker, set the speaker distance to the maximum. REMOTE CONTROL 1 2 19 GB 22 Test Tone Use test tone to check the speaker connection status or level. Press TEST TONE button. • Test signal will be automatically output as follows; F.L .CEN .F.R .S.R .S.L .S.W. • During test tone output, press …†button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone • Press TEST TONE button again. v To Automatically Output Test Tone REMOTE CONTROL 1 OPERATION Setting DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 3 times. • “DRC SETUP” appears on the display. Press SURROUND button to set DRC. • Each time you press this button, DRC : STD .DRC : MAX .DRC : MIN will be selected in turn. To Exit Setup Mode • Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. “SETUP MODE OFF” appears on the display and exits Setup Mode. v • STD : Sets DRC effect to standard. • MAX : Sets DRC effect to maximum. • MIN : Sets DRC effect to minimum. Setting DRC MAIN UNIT 1 2 3 21 • You can only set this function via the main unit. GB • F.L (Front-Left) : -10 ~ +10dB • CEN (Center) : -10 ~ +10dB • F.R (Front-Right) : -10 ~ +10dB • S.R (Surround-Right) : -10 ~ +10dB • S.L (Surround-Left): -10 ~ +10dB • S.W (Subwoofer): -10 ~ +10dB 24 Test Tone Output Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 5 times. • “TEST-T MANU” appears in the display. Press SURROUND button. • Each time you press this button, F.L .CEN .F.R .S.R .S.L .S.W will be selected in turn. Press SELECT( )button to set the test tone as you want. • You can adjust the speaker output level from -10 to +10dB by 1 step. v To Manually Output Test Tone MAIN UNIT 1 2 4 3 To Stop Test Tone Method 1) Press INPUT button 1 time. • “TEST-T OFF” appears on the display and test signal stops. Method 2) Turn VOLUME CONTROL. • “SETUP MODE OFF” appears on the display and test tone stops. , OPERATION 23 Test Tone Use test tone to check speaker connection status or level. Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 4 times. • “TEST-T AUTO” appears in the display. Press SURROUND button. • Test signal will be automatically output as follows; F.L .CEN ....
Otros modelos de este manual:El receptor y el amplificador - AV-R600 (7.06 mb)