Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Press the PROLOGIC button on the remote control. MOVIE : Adds realism to the movie soundtrack. MUSIC : Provides 5.1 channel surround sound for digital, analogue or existing stereo sources. GAME : Enhances the excitement of the game’s sound. MATRIX : You will hear 5.1 channel surround sound. PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound. SETTING DOLBY PRO LOGIC II This function works only in Dolby Pro Logic ll MUSIC mode. 1. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. • 3. Press the ^Ў buttons to select DPLII SETUP, and then press the ENTER or > button. 4. Press the ^Ў buttons to select the option you want, and then press the .. ENTER or > button. PANORAMA : You can set it ON or OFF. (This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.) • DIMENSION : You can set from -7 to +7. (Incrementally adjusts the sound field (DSP)from the front or surround.) C- WIDTH : You can set from 0 to 7. (This sets the width of the centre sound image. The higher the setting, • the less sound comes from the center speaker.) M . . . PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC. You cannot use Dolby Pro Logic II mode for multi channel signals such as Dolby Digital and DTS. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. . SETUP 37 HW-C500-C560S-EUR-0615.indd 37 2010-06-16 3:08:05 Setup SETTING TONE CONTROL This will enable you to adjust the bass and treble level. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. • 3. Press the ^Ў buttons to select TONE CONTROL, and then press the ENTER or > button. 4. Press the ^Ў buttons to select the option you want, and then press the ENTER or > button. • • Each time you press this button, TONE .. BASS .. TREBLE will be selected in turn. 5. Press the ^Ў buttons to set the Tone Control mode you want. If it is set to the TONE OFF, Tone Control function will be disabled. You can adjust it from -6 to +6dB by 1 step. The sound gets quieter at -6dB and louder at +6dB. - To exit setup mode • Press the SETUP/MENU button. SETUP OFF appears on the display and Setup Mode is exited. M . The Tone Control function can be applied to all channels except for the subwoofer. 38 HW-C500-C560S-EUR-0615.indd 38 2010-06-16 3:08:05 39 ENG . SETUP AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ^Ў buttons to select A/V SYNC, and then press the ENTER or > button. Press the ^Ў buttons to set the A/V Sync mode you want. You can adjust it from OFF to 240MS in 10MS steps. MP3 ENHANCER This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better sound from a low quality mp3 source. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ^Ў buttons to select MP3 ENHANCER, and then press the ENTER or > button. Press the ^Ў buttons to select ON or OFF. SMART VOLUME This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ^Ў buttons to select SMART VOLUME, and then press the ENTER or > button. Press the ^Ў buttons to select ON or OFF. 1. • 2. 3. 4. • 1. • 2. 3. 4. 1. • 2. 3. 4. .. .. .. .. .. .. HW-C500-C560S-EUR-0615.indd 39 2010-06-16 3:08:05 40 Setup ASC (AUTO SOUND CALIBRATION) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1- channel sound fi eld optimized for your environment. - Before Setting - Plug the ASC microphone into the ASC MIC jack. Place the ASC microphone at the listening position. Press the ASC button on the front panel, and then press the ENTER button. Press the SETUP/MENU button. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ^Ў buttons to select ASC SETUP, and then press the ENTER or > button. Press the ^Ў buttons to select ASC START, and then press the ENTER button. To create the optimal 5.1 channel sound fi eld, the selections ar...
Otros modelos de este manual:El receptor y el amplificador - HW-C500 (6.27 mb)