Votos - 2, Puntuación media: 4 ( )

Fabricar: Kenwood Tamaño del archivo: 688.64 kb Nombre del archivo: Idioma del manual:

Under certain receiving conditions, it may take more than 1 minute to complete the search. .. PTY PTY P.CALL ¤ / ‹ P.CALL ¤ / ‹ .. RC-R0610 RC-R0510 Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. • Tune to an RDS station. 1Press the PTY key to activate the PTY search mode. SP A RL STEREO PTY SW RDS When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, “NONE” is displayed. 2While the “PTY” indicator is lit, use the P.CALL keys toselect the program type of your choice. Program type table 3Press the PTY key to start searching. EXAMPLE: Searching for a Rock Music broadcast. Display while searching Blinks STEREOSW RLSP A PTYRDS FM Program type name display Display when a station is received. Goes out STEREOSW RLSP A RDS FM Station name display • No sound is heard while “PTY” is blinking. • If the desired program type cannot be found, “NO PROG” is displayed, then after several seconds the display returns to the original display. To select another program type Repeat steps 1, 2 and 3. Operations Program Type Name Display Program Type Name Display News NEWS Weather WEATHER Current Affairs AFFAIRS Finance FINANCE Information INFO Children’s programmes CHILDREN Sport SPORT Social affairs SOCIAL Education EDUCATE Religion RELIGION Drama DRAMA Phone In PHONE IN Culture CULTURE Travel TRAVEL Science SCIENCE Leisure LEISURE Varied Speech VARIED Jazz music JAZZ Pop Music POP M Country Music COUNTRY Rock Music ROCK M National Music NATION M Easy Music EASY M Oldies Music OLDIES Light Classical Music LIGHT M Folk Music FOLK M Serious Classical Music CLASSICS Documentary DOCUMENT Other Music OTHER M .NO PROG. is displayed if this operation is attempted before performing the RDS Auto Memory operation. Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. % Surround modes Operations Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confiden- tial Unpublished Works. ©1992-1997 Dolby Laboratories. All rights re- served. DTS (KRF-V7030D only) The DTS multi-channel audio format is available on CD, LD and DVD software. DTS is a strictly digital format and can not be decoded inside most CD, LD or DVD players. For this reason, if you attempt to listen to DTS encoded software through the analog output of your new CD, LD or DVD player, you will experience digital noise in most cases. This noise can be quite loud if the analog output is connected directly to a high power amplification system. Proper measures for playing the digital output as described below should be taken to avoid this situation. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system or an amplifier with a built-in DTS Digital Surround decoder must be connected to the digital output (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD player. KRF-7030D is incorporate the DTS decoder. * Optional in this mode. * LFE = Low Frequency Effects. This channel delivers separate non- directional bass signals to the subwoofer for more dynamic deep bass sound effects. DTS has a .1 or LFE channel. The indication "LFE" appears in the display when a signal is being input for this channel. Front speaker (L, R) Subwoofer (LFE)* Center speaker Surround speakers (L, R) Manufactured under license from Digital Theater Systems, Inc. US Pal. No. 5,451,942 and other worldwide patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved. Dolby Digital (AC-3) The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital (AC-3) program sources (such as Laserdisc or DVD software marked ). Com- pared with previous Dolby surround, Dolby Digital (AC-3) provides even better sound quality, greater spatial accuracy, and improved dynamic range. Note Although a full set of speakers (front left, right, and center, surround left and right, and a subwoofer) is required for true 5.1 channel Dolby Digital (AC-3) surround sound, this receiver lets you enjoy Dolby Digital (AC-3) (and Dolby Surround) program sources, even if you connect only the front speakers. ("Speaker placement") $ * LFE = Low Frequency Effects. This channel delivers separate non- directional bass signals to the subwoofer for more dynamic deep bass sound effects. Although only Dolby Digital (AC-3) soundtracks incorporate a separate low frequency channel, connecting a subwoofer will also improve deep bass performance in the other surround modes. The indication "LFE" appears in the display when a signal is being input f...

Descargar ahora

Introduzca dos números de la imagen: