Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Music (Middle of the Road Music) EXAMPLE: Searching for a Rock Music broadcast. Display while searching Blinks ROCK M FM STEREO ASP MUTEMUTE SW RL RDS PTY Program type name display Display when a station is received. Goes out BBC 1 FM FM STEREO ASP MUTEMUTE SW RL RDS Station name display • No sound is heard while “PTY” is blinking. • If the desired program type cannot be found, “NO PROG” is displayed, then after several seconds the display returns to the original display. To select another program type Repeat steps 1, 2 and 3. Reserving the desired information When the receiver is tuned to a RDS EON station (a station at which the EON indicator lights up), this function lets you set the receiver to automatically switch stations to receive news or traffic programs as they are broadcast. When the broadcast is over, the receiver returns to the original station automatically. TA/NEWS VOLUME CONTROL VOLUME TA/NEWS RC-R0710 Preparation • Set the broadcast band to FM. Listening to radio broadcasts 1Complete steps 1~3 of "Presetting RDS stations (RDS AUTO MEMORY)". * Skip this step if you have already completed the RDS AUTO MEMORY procedure. • The EON function will not work if all 30 FM preset stations were stored manually using the procedure shown in “Presetting radio stations manually”. Be sure to use the RDS automatic memory function. 2Press the TA/NEWS key to select the information type of your choice. Display When "TA" is selected SP A RL MUTE MUTEMUTE RDSTP TA SW STEREO BBC 1 FMFM "TP" lights for stations where TP (Traffic Program) information can be received. Each press switches the reservation mode as follows: 1 TA (Traffic Announcement) 2 NEWS (News) 3 TA, NEWS (Traffic Announcement and News) 4 off (EON off) •If “TA” and “NEWS” can not be selected, carry out the RDS automatic memory function again. * 3Tune to a preset RDS station. Choose an RDS preset station that displays both the "RDS" and "EON" indicators. Display When "TA" is selected SP A RDS EONTA MUTE RL SW STEREO BBC 2 FMFM Be sure "EON" appears in the display • If you want to reserve TA, receive a station with which the TP indicator lights. • When “EON” does not light although an RDS station is received, that station is not transmitting EON data. Please select a different station. 4Wait for the information you selected while listening to the current station. The receiver will wait for the desired information to start as long as the tuner is set to a preset RDS station that displays both the "EON" and "RDS" indicators, and the power is turned ON. When listening to the tuner: Be sure to stay tuned to stations that display both the “EON” and “RDS” indicators. To listen sources other than the tuner: 1 Tune in a station which that displays both the “EON” and “RDS” indicators, then use the INPUT SELECTOR to switch the input to the source you desire. 2 Even when the INPUT SELECTOR is set to a source other than tuner, it will automatically switch to tuner when the desired EON program starts to broadcast. During this period, the source selected in step 1 continues playing, but will not be heard. 3 When reception of the desired EON program is complete, the INPUT SELECTOR returns to the previous input source. • When the power is OFF, the EON function does not operate. • If a reserved EON program starts to broadcast during analog recording, the INPUT SELECTOR switches to the tuner and the station broadcasting the EON program is recorded. KRF-V7020/V6020/V5020 (En/T) When waiting for information while listening to a RDS station without the EON function If the “EON” indicator does not light in steps 3 and 4 and the desired kind of information has already been selected, the information from only the station being received will be waited for. TP (Traffic Program) indication When the “TP” indicator is lit, this means that the presently-received station or a station in the same network is transmitting traffic information. When “TP” is displayed for the station being received, the traffic information of this station can be received without EON reservation. To cancel EON reservation Turn the “TA” and “NEWS” indicators off. Setting the volume while receiving information (TI volume) If you preset the volume level, you can listen to the information of your choice at that volume level automatically. After the information has been received, the volume returns to the previous level. 1 Hold down the TA/NEWS key for more than two seconds so that the “TI.VOL” indicator starts blinking. Operations TI -5 dB) FM STEREO ASP MUTEMUTE SW RLTI.VOL RDS Blinks 2 Use the VOLUME CONTROL knob to select the desired volume level. Proceed to next step within five seconds. 3 Press the TA/NEWS key to enter the new setting. • The “TI.VOL” indicator stops blinking and remains lit. Canceling TI volume Hold down the TA/NEWS key for more than two seconds so that the “TI.VOL” indicator goes off. Ambience effects KRF-V7020/V6020/V5020 (En/T) This receiver is equipped with listening modes that allow ...
Otros modelos de este manual:El receptor y el amplificador - KRF-V6020 (729.65 kb)
El receptor y el amplificador - KRF-V7020 (729.65 kb)