Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
LSP A R SW B • Activating a surround mode or selecting “DVD 6ch” as the input source causes speaker system A to be selected automatically. • When you use the PRE OUT jacks, press the only SPEAKERS A key to the on position. Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing POWER or SYS.POWER (and ON/STANDBY) key(s). Listening to a source component VOLUME CONTROL INPUT SELECTOR MUSIC MOVIE VOLUME+/– 1 Use the INPUT SELECTOR knob, MUSIC key, or MOVIE keyto select the source you want to listen to. The input sources change as shown below: Selecting a source using the INPUT SELECTOR knob 1 "PHONO" 2 "TUNER" 3 "CD/DVD" 4 "TAPE" or "MD" 5 "VIDEO1" 6 "VIDEO2" 7 "VIDEO3" 8 "DVD/6ch" 9 "AV AUX" Selecting a source using the MUSIC key 1 "CD/DVD" 2 "TAPE" or "MD" 3 "TUNER" 4 "PHONO" Selecting a source using the MOVIE key 1 "VIDEO1" 2 "VIDEO2" 3 "VIDEO3" 4 "DVD/6ch" 5 "AV AUX" 2Start playback from the selected source. 3 Use the VOLUME CONTROL (VOLUME +/–) to adjust thevolume. Normal playback Adjusting the sound SOURCE DIRECT VOLUME CONTROL SOUND MULTI CONTROLPHONES SPEAKERS A/B 5/° VOLUME +/– MUTE SOUND BASS BOOST F.SHIFT Adjusting the tone You can adjust the sound quality when the receiver is in the stereo mode. 1 Press the SOUND key to select the tone mode to be adjusted. BASS: Select this to adjust the low frequency range. (Press the SOUND key once.) TREB: Select this to adjust the high frequency range. (Press the SOUND key twice.) SW LSP A R STEREO 2 Use the MULTI CONTROL knob or the 5/° keys to adjust the sound quality. • The bass and treble levels are adjustable from -10 to +10 in 2 step increments. • The adjustment item is displayed for approximately 8 seconds. Once-touch low frequency emphasis (bass boost) You can adjust the sound quality when the receiver is in the stereo mode. Press the F.SHIFT key, then press BASS BOOST key. • Press the key once to select the maximum (+10) low frequency emphasis setting. • This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. Switching back to the previous setting Press the BASS BOOST key again. Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. SW LSP A R MUTE Blinks To cancel Press the MUTE key again so that the “MUTE” indicator goes off. • Muting can also be canceled by adjusting the volume. SOURCE DIRECT playback (analog sources only) Use this function to pass the source material direct to the amplifier, bypassing any audio processing. Press the SOURCE DIRECT key. S.DIRECT • When you press the LISTEN MODE, SOUND, or SETUP keys, or switch to another input source, SOURCE DIRECT playback will be canceled. To cancel Press the SOURCE DIRECT key again. • If SOURCE DIRECT playback was activated when using a surround mode, cancelling it reactivates the previous surround mode. Operations Listening with headphones 1 Press the SPEAKERS A or B key so that the speaker indicator goes off. Make sure the Speaker indicator are turned off. SP A • If you turn off all of the speakers when in the surround mode, the mode is cancelled as well, resulting in stereo playback. • The speakers do not switch off during the 6CH INPUT mode. Select the other input mode. 2 Connect headphones to the PHONES jack. PHONES 3 Use the VOLUME CONTROL (VOLUME+/-) to adjust the volume. Recording Recording audio (analog sources) MONITOR INPUT SELECTOR Recording a music source 1 Use the INPUP SELECTOR knob to select the source (other than "MD/TAPE") you want to record. 2 Set the cassette deck or MD recorder to record. 3 Start playback, then start recording. Recording tapes or MDs MONITOR = MD/TAPE recording Operations 1 Press the MONITOR key. STEREO MONITOR 2 Use the INPUP SELECTOR knob to select a source other than "MD/TAPE." 3 Start playback on the cassette deck connected to the MONITOR jacks and start recording on the cassette deck connected to the MD/TAPE jacks. MD/TAPE = MONITOR recording 1 Use the INPUP SELECTOR knob to select "MD/TAPE." 2 Start playback on the cassette deck connected to the MD/TAPE jacks and start recording on the cassette deck connected to the MONITOR jacks. • To copy tapes using a double cassette deck, refer to the instruction manual of the double cassette deck. MONITOR function (analog sources only) You can connect a cassette deck or graphic equalizer to the MONITOR jacks of the receiver. If a graphic equalizer is connected, the MONITOR key should be left in the on position. Alternately, if a cassette deck equipped with a 3-head system is connected to the MONITOR jacks, you will be able to monitor the just-recorded signal while making recordings on the cassette deck. By switching the MONITOR key on and off, you can compare the sound of the source signal and the just- recorded signal. For more information, refer to the instruction manual of the connected component. Recording video 1 Use the INPUT SELECTOR to select the video source (o...
Otros modelos de este manual:El receptor y el amplificador - KRF-V8030D (1.03 mb)