Votos - 4, Puntuación media: 4 ( )

Fabricar: Kenwood Tamaño del archivo: 2.92 mb Nombre del archivo: Idioma del manual:

4 JAZZ CLUB: DSP surround. 5 THEATER: DSP surround. 6 STADIUM: DSP surround. 7 DISCO: DSP surround. 8 STEREO: Normal stereo playback. Sound is produced from the two front channels only. • If a Dolby Digital signal having more channels than the maximum number of playback channels available using the receiver’s current settings is input, the DOWNMIX indicator on the front panel lights up and downmixing is performed to match the number of available channels. 3Adjust the volume. Notes • Depending on the type of the signal or speaker setting, some listening modes cannot be selected. • When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. • To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital compatible source component. Connect the Dolby Digital compatible source component's Dolby Digital format digital audio signal to one of the DIGITAL INPUT jacks on the back of the receiver. Connect the normal audio signal correctly to the respective component's AUDIO jacks. 0!@# Operations SRSL Ambience effects DVD 6-channel playback (VR-506/517/KRF-V6050D/V5050D) Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital such as DTS CD, no sound is produced or, noise may be heard. To avoid this situation, make sure that you connect the component to the receiver’s DVD/6ch. INPUT jacks through a surround processor which can decode the surround signal you wont to listen to. Connecting a DVD player which can decode the surround signal itself is also acceptable. INPUT MODE INPUT SELECTOR Operations DVD RC-R0511 RC-R0615/R0617 Preparations • Connect your DVD player to the DVD/6ch jacks of the receiver. • Turn on all other components that will be used. • Complete “Preparing for surround sound”. ( Select “DVD/6ch” as the input source. 1 • If speaker system B is on when “DVD/6ch” is selected as the input source, it switches off and speaker system A turns on automatically. 2Select "6ch INPT" by pressing the INPUT MODE key. 3Start playback of the DVD software. 4Adjust the volume. • It is not possible to adjust the volume level or sound quality (SET UP, SOUND) of the channels separately when the receiver is in the DVD/ 6ch mode. Adjust the volume with the controls of the DVD player. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control. Convenient functions MULTI CONTROL RC-R0511 RC-R0615/R0617 DIMMER SOUND SOUND MULTI CONTROL Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 Press the SOUND key until the desired item appears in the display. Each time you press the button, the menu changes as follows: Note that some items are not displayed in certain modes. 1 BASS (low frequency range sound quality adjustment) . 2 TREB (high frequency range sound quality adjustment) . 3 C (center speaker level adjustment) 4 SR (right surround speaker level adjustment) 5 SL (left surround speaker level adjustment) 6 SW (subwoofer level adjustment) 7 INPUT (input level adjustment) ) 8 NIGHT (midnight mode on/off) 2 Use the MULTI CONTROL keys to adjust the setting as desired. • The adjustment item is displayed for approximately 8 seconds. Ambience effects Midnight mode (Dolby Digital mode only) When watching movies at night you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the Dolby Digital sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low volumes. 1 Press the SOUND key repeatedly until “NIGHT” appears on the display. • This can be selected only if CD/DVD, DVD (VR-505/KRF-V5550D only) or VIDEO2 is selected as the source and the listen mode is set to “DOLBY DIGITAL.” 2 Use the MULTI CONTROL keys to select the ON or OFF setting. A AUTO SOUND DIGITAL SP L RC LFE SRSL • The adjustment item is displayed for approximately 8 seconds. • Some Dolby Digital software may not be compatible with the Midnight mode. Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you press the DIMMER key, the display brightness changes among the three available settings. Select the brightness level you find most pleasing. Operations SP A PRO LOGIC SW S RCL SP A PRO LOGIC SW S RCL SP A PRO LOGIC SW S RCL 96kHz LPCM playback The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to “STEREO”. • When “96kHz” appears in the display, press the LISTEN MODE key (the lis...

Descargar ahora

Introduzca dos números de la imagen: