Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
5. Touch the disc or track name you want to change. 6. Touch . See “How Do I Enter Text?” on page 8 for more information on changing names. 7. Press . 8. Repeat steps 5 to 7 for each title you want to store. 9. Touch to return to the disc or track controls. Touch it again to return to the CD controls. If you rearrange or add new CDs to the changer, you will need to repeat both the disc and track read process. Otherwise, disc information is stored in PowerTouch III permanently. The track title information is not stored permanently in PowerTouch III. Each time you select a CD to play you have to download its track title information. Title reading by PowerTouch III is not possible for the following models. Model: CD-2280M and CD-2260M. 44 How Do I Operate Devices? To play discs and tracks by title: 1. Touch (HOME1) on the Quick Access menu. 2. Touch button. 3. Touch . This accesses the disc commands: 4. Titles of all discs in the changer are displayed in numerical order. 5. Use the up or down arrow to scroll through the discs numerically, then touch the disc title you want to play. 6. If you want to play the disc from the beginning, touch 7. (Optional) Touch . The track titles for that disc are displayed in numerical order. 8. If you want to play the disc starting from a particular track, use the up or down arrow to scroll through the track titles, then touch the track title. 9. When you’ve highlighted the track you want to begin playing, touch . . 10. Touch to return to the CD controls. Using PowerTouch III 45 How Do I Operate Devices? To play Kenwood 200-Disc CD Changer (without system connection) using PowerTouch III: 1. Touch (HOME1) on the Quick Access menu. Using PowerTouch III 2. Touch button . This accesses the CD controls: 3. Use this screen as your CD remote. Touch (More) to access any customized commands you have taught PowerTouch III for this device and to access this device’s macros. Touch the command or macro name to use it. For more information on teaching commands to PowerTouch III, see “To Customize the PowerTouch III Screen” on page 43 of the Connections and Setup Guide. For more information on device macros, see “How Do I Perform Several Actions at Once?” on page 76 of this manual. For more information on operating a CD player from another Zone, see “Chapter Three: Using PowerTouch III in Multiple Zones”. Displaying Disc and Track Titles Kenwood 200-Disc CD Changers allow you to easily search for and select a particular CD or song by title from any disc you’ve loaded into the unit. PowerTouch III can display these disc and track titles on its LCD display, allowing you to choose discs and songs by title in a few simple steps. 46 How Do I Operate Devices? You have to assign disc and track titles to the discs in your CD player before you can transfer them to PowerTouch III. See your CD player’s instruction manual for more information about assigning disc and track titles. To read the loaded disc titles and store them in PowerTouch III: 1. Touch (HOME1) on the Quick Access menu. 2. Touch (CD1). 3. Touch . This accesses the disc mode commands: 4. If you haven’t already done so on the CD changer, touch This reads all of the disc and track title information into the CD changer’s memory. 5. Set PowerTouch III down so that its IR transmitter window is aiming at the CD changer’s IR transmitter window. Select Do not move PowerTouch III while it is reading data. This process may take some time, depending on how many CDs you have loaded. When the IR light on the receiver goes out, CD changer is done sending the information to PowerTouch III, and you may move PowerTouch III again. PowerTouch III’s memory now contains the disc titles of every CD in the changer with title information. 6. Touch to return to the CD controls. . . Using PowerTouch III 47 How Do I Operate Devices? To read the loaded track titles and store them in PowerTouch III: 1. Make sure you have followed the previous instructions to read disc data. 2. Touch (HOME1) on Quick Access menu. 3. Touch 4. Touch . This accesses the disc mode commands. . 5. If you haven’t already done so on the CD changer, touch This reads all of the disc and track title information into the CD changer’s memory. Touch to return to the CD controls. 6. Touch to select the disc you want to play. 7. Use the up or down arrow to scroll through the disc titles. 8. Touch to play a disc, and then touch to stop playback. 9. Touch 10. Set PowerTouch III down so that its IR transmitter window is aiming at the CD changer’s IR transmitter window. Touch Do not move PowerTouch III while it is reading data. This process may take some time, depending on how many tracks CD has you have loaded. You will see the track titles on the PowerTouch III when it is finished reading data. 11. Touch to return to the CD controls. . . . Using PowerTouch III 48 . . How Do I Operate Devices? Entering Disc and Track Titles You can also use PowerTouch III to enter disc or track titles, if they are not ...