Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Kenwood, modelo VR-7080

Fabricar: Kenwood
Tamaño del archivo: 2.41 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Especially for the music sound source playback, the reproduced sound becomes more natural when adjusting the output characteristics. When activating the SPEAKER EQ function, you will be able to enjoy a more natural and dynamic sound experience even with small size speakers. Universal IR (InfraRed) remote control In addition to the basic receiver, the remote control supplied with this receiver can also operate almost all of your remote controllable audio and video components. Just follow the simple setup procedure to register the components you have connected. 6 EN 7 EN L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs DSP MODE DTS MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 A B CLIP CS II AUTO DETECT THX AUTO MEMORY STEREO TUNED SW LFE THX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER SOUND TONE SETUP BAND AUTO MEMORY TUNER MULTI CONTROL LISTEN MODE VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE CD/DVD PHONO THX DTS CS II DOLBY DIGITAL SPEAKER EQ ACTIVE EQ STANDBY ON/STANDBY A SPEAKERS B POWER PHONES DOWN MUTE AV AUX S VIDEO VIDEO L-AUDIO-R UP VOLUME CONTROL DVD/6CH Surround EX STANDBY POWER ON/STANDBY Names and functions of parts 1 POWER ON/OFF key (For KRF-X9070D) . Use to turn the main power ON/OFF. 2 ON/STANDBY key (For KRF-X9070D) . Use to turn the power ON/STANDBY when the POWER is turned ON. STANDBY indicator 2 POWER ON/STANDBY key (For VR-7080) . Use to turn the power ON/STANDBY. STANDBY indicator 3 SPEAKERS keys § Use to turn the A/B speakers on or off. 4 THX key fi Use to switch the status of THX. 5 SPEAKER EQ key ¶ Use to select SPEAKER EQ’s setting. 6 Surround LED (light-emitting diode) indicators THX indicator fl Lights when THX mode has been chosen. THX mode may or may not be activated depending upon the applicable playback mode. SPEAKER EQ indicator • Lights when the receiver is in the SPEAKER EQ mode. Main unit % Input Selector keys § (DVD/6CH, CD/DVD, PHONO, TUNER, VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE) Use to select input sources. ^ SOUND key ‡ Use to adjust the sound quality and the ambience effects. & BAND key . Use to select the broadcast band. * AUTO key . Use to select the auto or manual tuning mode. ( TONE key ¶ Use to switch the status of TONE control. ) MEMORY key . Use to store radio stations in the preset memory. . SETUP key . Use to select the speakers' settings etc. ™ ./. keys . Use for selection adjustments during sound, set up and preset channel functions. . MULTI CONTROL knob . Use to control a variety of settings. . LISTEN MODE knob ‡ Use to select the listening mode. . AV AUX (S VIDEO, VIDEO, L-AUDIO-R) jacks . § AV AUX key . Use to switch the input to AV AUX. ACTIVE EQ indicator • Lights when the receiver is in the ACTIVE EQ mode. DOLBY DIGITAL indicator fi Lights when the receiver is in the Dolby Digital mode. DTS indicator fi Lights when the receiver is in the DTS mode. CS II indicator fi Lights when the receiver is in the CIRCLE SURROUND II mode. 7 ACTIVE EQ key ¶ Use to select ACTIVE EQ’s setting. 8 DSP key fi Use to select any of the DSP mode. 9 STEREO key ‡ Use to switch the listen mode to STEREO. 0 INPUT MODE key 0 Use to switch between the full auto, digital and analog inputs. ! DIMMER key Use to select the REC MODE. . Use to adjust the brightness of the display. ‡ @ VOLUME CONTROL knob § # MUTE key ¶ Use to temporarily mute the sound. $ PHONES jack • Use for headphone listening. Standby mode While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by remote control unit. Display Speaker selection indicators Input channel indicators Output channel indicators AUTO indicator MEMORY indicator STEREO indicator TUNED indicator Frequency display Input display Preset channel display Surround mode display Speaker indicators MUTE indicator CLIP indicator Input mode indicators Listen mode indicators CAUTION The power in this equipment will not be completely cut off from the AC wall outlet when the main switch is turned OFF. (For VR-7080) for KRF-X9070D Names and functions of parts Names and functions of parts • This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s setup codes. e • When you pick up the remote control unit or press any key, all keys will be illuminated and then the remote control unit will be activated with last active mode screen. To switch ON or OFF the full illumination mode : 1 Press and hold the LEARN key for 3 seconds until the IR indicator blinks twice, then release the LEARN key. 2 Press the Numeric keys to enter “9 - 7 - 8”. • If you don’t use the remote control unit, put it under no tilt condition. • This remote control unit has “MAIN” screen mode and “SUB” screen mode. (see page 9, 9) TAPEA MUTE PTY MAIN SUB MULTI P. CALLP. CALL MULTI B MD/TAPE CD/DVD VIDEO1 VIDEO2 VIDEO3 TUNERDVD/6CH TV AV AUX PHONO CH SCAN...

Otros modelos de este manual:
El receptor y el amplificador - KRF-X9070D (2.41 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría