Votos - 4, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Ignition cable (Red) A-7 Pin (Red) Unit Vehicle Battery cable (Yellow) A-4 Pin (Yellow) 2The A-7 pin (red) of the vehicle’s ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition. Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow) 6 | DNX9240BT/DDX8024BT/DDX8054BT System Connection RELAY 2 RELAY 1 iPod USB device (commercially available) USB terminal iPod (commercially available) Audio input (iPod/AV input 3 switchable) Resistance-free stereo type mini plug (3.5.) Visual input (iPod/AV input 3 switchable) Resistance-free mini plug (3.5.) Accessory 2 CAMERAREAR VIEW AV IN 2CENTER AV IN1FRONTREARWOOFER SUB AV OUT Accessory 3 Accessory 4 Audio/Visual output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) Audio/Visual input • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) Audio/Visual input • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) Rear View Camera input • Visual input (Yellow) Front Preout • Audio left output (White) • Audio right output (Red) Rear Preout • Audio left output (White) • Audio right output (Red) Subwoofer Preout • Audio left output (White) • Audio right output (Red) Center Preout To Relay Box English | 7 Optional Accessory Connection iPod (commercially available) TV ANTENNA INPUT TO MONITOR UNIT iPod KCA-iP301V (Optional Accessory) Audio Output (Black) Visual Output (Yellow) Navigation System (Optional Accessory) (DDX8024BT/ DDX8054BT only) Connection cable USB terminal TV Tuner (Optional Accessory) USB device (commercially available) Connection cable (Included in the Navigation System) (Included in the TV tuner) 8 | DNX9240BT/DDX8024BT/DDX8054BT Installation the Escutcheon For Volkswagen For Toyota/Scion (DDX8054BT only) 1. Attach accessory 8 to the unit. 1. Cut out accessory 6 as illustrated. Accessory 8 For General Motors (DDX8054BT only) 1. Cut out accessory 6 to meet the shape of the opening of the center console. 2. Attach accessory 6 to the unit. Accessory 6 Cut out to meet the shape of the opening in the vehicle. Cutting line Accessory 6 2. Fold double-sided adhesive (accessory 7) along the slit and attach it to accessory 6 cut-out against the center rib as illustrated. Use 2 pieces of accessory 7 for 1 accessory 6 cut-out. 3. Attach accessory 6 cut-out to the unit. Accessory 7 English | 9 Installing the GPS Antenna (DNX9240BT only) GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1. Clean your dashboard or other surface. 2. Peel the backing off of the adhesive on the bottom of the metal plate (accessory 0). 3. Press the metal plate (accessory 0) down firmly on your dashboard or other mounting surface. You can bend the metal plate (accessory 0) to conform to a curved surface, if necessary. 4. Place the GPS antenna (accessory 9) on top of the metal plate (accessory 0). Accessory 9 Accessory 0 ¤ Installing the Talk Switch (DNX9240BTonly) and the Microphone Unit 1. Check the installation position of the microphone (accessory !) and the Talk switch (accessory @). 2. Remove oil and other dirt from the installation surface. 3. Install the microphone and the Talk switch. 4. Wire the cable up to the unit with it secured at several positions using tape or the like. Fix a cable with a commercial Accessory ! Accessory @ item of tape. • Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. • The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may be interfered with by these types of communication. • Painting the GPS antenna with (metallic) paint may cause a drop in performance. Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. . • Install the microphone as far as possible from the cellphone. 10 | DNX9240BT/DDX8024BT/DDX8054BT Installing and Removing Monitor/Player Unit Installing the Monitor/Player Unit Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. . • Be careful to avoid injury from the catch pins on the removal tool. Removing the Hard Rubber Frame (escutcheon) 1. Engage the catch pins on the removal tool 5 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Accessory 5 Lock Catch . • The frame can be removed from the top side in the same manner. 2. When the lower level is removed, remove the upper two locations. Removing the Unit 1. Remove the hard rubber frame by referring to the removal procedure in the section