Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
1OUTCOAXIAL OUT FM antennaMW antenna fix the claw into the slot Step 5: Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Helpful Hint: – Refer to the type plate on the rear or bottom of the system for identification and supply ratings. 1 Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall. 2 Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its ends to the wall. For better FM stereo reception, connect an external FM antenna (not supplied). Helpful Hints: – Adjust the position of the antennas for optimal reception. –Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference. 8 8239 300 38591 English 9 8239 300 38591 IMPORTANT! – You can connect other audio and audio/visual equipments to this AV receiver in order to use the Home Cinema Audio System’s surround sound capabilities. – For connection to additional components, the audio/video cables are not supplied. – When making connections, make sure the colour of cables matches the colour of jacks. – Always refer to the instruction manual of the connected equipment to make an optimal connection. Optional Connections - Playback Connecting to TV/VCR/other audio devices . To hear the TV channels through this AV receiver, use the audio cables (white/red) to connect AUDIO IN-TV jacks to the corresponding AUDIO OUT jacks on the TV (see fig A). TV DISC TUNER AUX VOL TV VOL +- Before starting operation, 1 Start playing back the connected source as usual. 2 Press TV on the remote to activate the input source, then press VOL+-to adjust the volume level. . To hear the playback of other audio/visual devices (such as VCR, MP3 player, cassette player), use the audio cables (white/red) to connect AUDIO IN-AUX jacks to the corresponding AUDIO OUT jacks on the connected audio device (see fig B). TV/AV DISC TUNER AUX VOL AUX VOL +- Before starting operation, 1 Start playing back the connected source as usual. 2 Press AUX on the remote to activate the input source, then press VOL+- to adjust the volume level. VCR/CD/Tape player B (for example) AUDIO OUT S-VIDEO IN VIDEO IN SCART IN AUDIO OUT S-VIDEO IN VIDEO IN SCART IN L R + + SPEAKERS ( 3 ) FRONT RIGHT FRONT LEFT REAR LEFT REAR RIGHT FRONT CENTER SUBWOOFER FRONT RIGHT FRONT LEFT REAR RIGHT FRONT CENTER REAR LEFT SUBWOOFER 6 CHANNEL IN COAXIAL IN OPTICAL IN AUX TV AUDIO ANTENNA MW (75 ) FM COAXIAL OUT IN OUT AUDIO OUT L R A English 10 8239 300 38591 Optional Connections - Playback OR Connecting to a DVD/SACD player A B C OR DVD/SACD player You only need to make one connection to your DVD/SACD player from the following options, depending on the capabilities of your DVD/SACD player. Option 1: Using 6 Channel In jacks . If your DVD/SACD player has a built-in multichannel decoder (e.g. Dolby Digital, DTS) and has 6-channel (multichannel) output jacks, you may use the audio cables (not supplied) to connect the AV receiver’s 6 CHANNEL IN jacks to the corresponding output jacks on the DVD/SACD player (see fig A). Before starting operation, 1 Start playing back the connected source as usual. 2 Press DISC on the remote to select “DISC 6CH” in order to activate the input source, then press VOL+-to adjust the volume level. Helpful Hints: – The audio signals produced by 6 channel is multichannel surround. Therefore, switching to Stereo mode has no effect. – Making recording from this input is not possible. Option 2: Using Coaxial In jack . Or, use an coaxial cable to connect the AV receiver’s COAXIAL IN jack to the COAXIAL output jack on the DVD/SACD player (see fig B). Before starting operation, 1 Start playing back the connected source as usual. 2 Press DISC on the remote to select “DISC COAX” in order to activate the input source, then press VOL+-to adjust the volume level. Option 3: Using Optical In jack . Or, use an optical fiber-optic cable (not supplied) to connect the AV receiver’s OPTICAL IN jack to the OPTICAL output jack on the DVD/SACD player (see fig C). Before starting operation, 1 Start playing back the connected source as usual. 2 Press DISC on the remote to select “DISC OPTI” in order to activate the input source, then press VOL+-to adjust the volume level. Optional Connections - Recording Connecting to a recording device LL R ++ ( )SPEAKERS 3SPEAKERS 3 FRONT RIGHT FRONT LEFT REAR LEFT REAR RIGHT FRONT CENTER SUB- WOOFER FRONT RIGHT FRONT LEFT REAR RIGHT REAR LEFTFRONT CENTER SUBWOOFER 6 CHANNEL IN COAXIAL IN COAXIAL OUTOPTICAL IN AUX AUDIO ANTENNA MW (75 ) FM IN OUTCOAXIAL OUT COAXIAL IN / DIGITAL IN AUDIO IN L R Analogue Recording device Digital Recording device English . Connect the AV receiver’s COAXIAL OUT jack to the DIGITAL (COAXIAL) IN jack on a digital recording device (DTS-Digital Theatre System compatible, with a Dolby Digital de...