Manual de usuario Samsung, modelo HT-X250
Fabricar: Samsung
Tamaño del archivo: 6.05 mb
Nombre del archivo:
Idioma del manual:
|
 
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Otros manuales para este modelo:
Resumen del manual
Watch the video and sing along the lyrics displayed on the TV screen against the accompaniment. • In this manual, the instructions marked with are applicable to DVD-VIDEO, 1 Connect the microphone to the MIC jack on the front panel. You can connect up to two microphones. 2 Press the MIC VOL button to adjust the voice volume of the microphone. . MIC MIC DVD-AUDIO and DVD-R/-RW discs that have been recorded in Video Mode and then finalized. Where a particular DVD type is mentioned, it is indicated separately. • If a DVD-R/-RW discs has not been recorded properly in DVD Video format, it will not be playable. 3 Press the ECHO button to adjust the echo level of the microphone. • If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the speakers. Turning down the microphone volume or the speaker volume is also effective. • Microphone doesn't work while HDMI mode and HDMI AUDIO ON. 24 2424 25 2525 Before Using Your Home Theater To Operate your Samsung TV and the Home Theater with the HT-X250/HT-TX250's Remote Control The DVD Home Theater's remote can be used to control Samsung TVs. 1 Plug the main unit's power cord into the AC power supply. • Before plugging your system into a main socket, you must checkthe voltage setting (OPTIONAL). If the voltage of the socket doesnot correspond to the setting on the rear of the unit, you mayseriously damage your system. 2 Press the TV button to set the remote to TV mode. 3 Press the POWER button to turn on your Samsung TV with this remote. 4 Press the TV/VIDEO button to select VIDEO mode on your TV. VIDEO 5 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to operate the DVD Home Theater 6 Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. Selecting the Video Format Press the and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off. . By default, the video format is set to . . or will appear in the display. At this time, press the NT/PAL button shortly to select between and . . Each country has a different video format standard. . For normal playback, the video format of the disc must be the same as the video format of your TV. DVD VCD CD GB Disc Playback 1 Load a disc vertically into the Disc Insert Hole. . Insert a disc so that the label side faces forward. . Playback starts automatically. ALL 2 To eject the disc, press the EJECT button. OPERATION d To stop playback, press the STOP button during playback. . If pressed once, is displayed and the stop position will be stored in memory. If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.) . If pressed twice, is displayed, and if the PLAY/PAUSE ( ) button is pressed, playback starts from the beginning. d To temporarily pause playback, press the PLAY/PAUSE ( ) button during playback. . To resume playback, press the PLAY/PAUSE ( ) button again. • Depending on the content of the disc, the initial screen may appear different. • Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations. MP3/WMA-CD Playback MP3 JPEG File Playback JPEG GB Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played. 1 Load the MP3 disc. . The MP3/WMA menu screen will appear and playback will start. . The appearance of the menu depends on the MP3/WMA disc. . WMA-DRM files cannot be played. 2 In Stop mode, use the Cursor ^,Ў,<,> button to select the album, and then press the ENTER button. . Use ^,Ў to select the track. 3 To change the album, use the Cursor ^,Ў,<,> button to select another album in Stop mode, and then press the ENTER button. . To select another album and track, repeat Steps 2 and 3 above. 4 Press the STOP(.) button to stop playback. • Depending on the recording mode, some MP3/WMA-CDs may not play. • Table of contents of a MP3/WMA-CD varies depending on the MP3/WMA track format recorded on the disc. • Rissian filenames are not supported. d To play a file icon in the screen, . Press the Cursor ^,Ў,<,> button when it is in Stop mode and select a desired icon from the top part of the menu. Music File Icon : To play music files only, select the Icon. Image File Icon : To view image files only, select the Icon. Movie File Icon : To view movie files only, select the Icon. All File Icon : To select all files select the Icon. Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater. Slide Mode 1 Load the JPEG disc. . Playback starts automatically. Each image is displayed for 5 seconds and then the next image is displayed. 2 Press the SLIDE MODE button. . Each time the button is pressed, the image makes the transition as follows: SLIDE SHOW MODE : 1~5 SLIDE SHOW MODE : RANDOM SLIDE S...
Otros modelos de este manual:
Cine en casa - HT-TX250 (6.05 mb)
