Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
This Quick-Use Guide shows the easiest most common connection. Cable TV signal from the Cable Company 75Q jack on rear of Television Cable Box with RF In/Out Jacks This connection will not supply Stereo sound to the LCD TV Monitor. The sound from the Cable Box will be monaural (single-channel, not left and right). 1 2 3 4 Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box. Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box. Connect the other end of the coaxial cable to the TV jack on the LCD TV Monitor. Screw it down finger tight. Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to the same channel. When watching TV programming, change channels at the Cable Box, not the LCD TV Monitor. NOTE: To see how to make other connections, please refer to the Owner’s Manual. Quick-Use Guide LCD TV Monitor Swivel 1 Press down on the stand and gently adjust the set to a suitable viewing angle. NOTE:The LCD TV Monitor can only be tilted 20 degrees backward and 5 degrees forward. You can adjust the LCD TV Monitor to the left and right 60 degrees. Auto Program 1 2 3 4 5 6 Press the MENU button on the remote control to show the onscreen menu. Press the ♦(CH UP) or »(CH DN) buttons to highlight the TV INSTALL menu. Press the ^(VOL-) or |(VOL+) buttons to enter the TV INSTALL menu. Press the ♦(CH UP) or »(CH DN) buttons to highlight the AUTO PROGRAM control. Press the >(VOL+) or |(VOL-) button to start the Auto Program scanning of channels. Press the MENU button repeatedly to clear the menu from the screen. o © © © © © © © © © ® © ® EL6568E001...