Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Cet ampli-tuner est equipe d’une fonction de conversion des signaux video. Reportez-vous a « 4b: Raccordement des appareils video » dans le mode d’emploi fourni avec l’ampli-tuner. 4: Raccordez tous les cordons d’alimentation en dernier lieu Branchez le cordon d’alimentation secteur fourni a la borne AC IN de l’ampli-tuner, puis branchez-le a une prise electrique murale. English Calibrating the appropriate speaker settings automatically (Auto Calibration) You can set up the speakers to obtain the desired sound from all connected speakers automatically by using the auto calibration function. Before you perform the auto calibration During the calibration, the sound that comes out of the speakers is very loud. Pay attention to the presence of children or to the effect on your neighborhood. Perform the measurement in a quiet environment to avoid the effect of noise and get a more accurate measurement. If there are any obstacles in the path between the optimizer microphone and the speakers, the calibration cannot be performed correctly. Remove any obstacle from the measurement area to avoid measurement error. 1 Install and connect the speakers and TV. For detail, see front page. 2 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones. Doing so may damage the receiver and the microphone. 3 Set up the optimizer microphone. Place the optimizer microphone at your seating position. Use a stool or tripod so that the optimizer microphone remains at the same height as your ears. Orient the L end of the optimizer microphone toward the front left speaker and the R end of the optimizer microphone toward the front right speaker. On setting up the active sub woofer When a sub woofer is connected, turn on the ...............sub woofer..... and turn up the volume beforehand. Turn the MASTER VOLUME knob to just before the mid-point. If you connect a sub woofer with the crossover frequency function, set the value to maximum. If you connect a sub woofer with an auto standby function, set it to off (deactivated). Performing auto calibration The auto calibration function allows you to measure the following: speaker connections, polarity of speakers, speaker distance, speaker angle, speaker size, speaker level, frequency characteristics. 1 Connect a TV monitor to this receiver. Refer to “3: Connecting the monitor” in the operating instructions. 2 Turn on the receiver and the TV. Switch the input of the TV so that an image of the menu is displayed. 3 Press AMP to enable receiver operation. 4 Press SHIFT, then press MENU. The menu list of this receiver appears on the TV screen. Press AMP MENU if the menu list does not appear on the TV screen. The menu appears on the TV screen when “GUI MODE” appears on the display. 5 Press ./. repeatedly to select “Settings,” then press. ...or. .. The Sett...