Votos - 6, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Arcam FMJ AVR600 |
Resumen del manual
To restore a moved device Mode key to its original state 1. Press and hold S until the power LED blinks twice: **. 2. Press 992. 3. Press the Device Mode key you want to restore twice. Locking/Unlocking a specific device Mode When you first unpack your CR102 and insert the batteries, for your convenience it is able to control certain Arcam components automatically (e.g. DVD players, Amplifiers, Tuners and CD Players). We achieve this by preprogramming specific Arcam device codes onto the relevant Device Mode keys, then locking the Device Modes so you don’t reprogram them inadvertently. If you want to override these locked default settings – to control a third-party DVD player, for example – you will first need to unlock DVD Mode before setting up the CR102 using one of the methods described at the start of this guide. Here are the factory default settings: Device Mode Default status Default Arcam codes DVD Locked 0762 SAT Unlocked 1205 AV Unlocked 0586 Tun Locked 2009 AMp Locked 1242 pVR Unlocked 1930 VCR Unlocked 0111 CD Locked 2010 Alternative codes are available for multi-room solutions, or in the case of code clashes with other manufacturer’s products. For example: DVD (system code 12) 1655 AMp (system code 19) 1954 You will need to change the system code on the product you wish to control, as well as the CR102. NOTE The AMp Device Mode can only be used to control Arcam amplifiers like the AVR600, either on its default or alternative IR system codes. To toggle a Device Mode lock setting: 1. Press the Device Mode key you want to unlock (e.g. d) 2. Press and hold S until the power LED blinks twice: **. 3. Press 982. < The power LED blinks twice when being locked, and blinks four times when being unlocked. < If you enter an invalid key sequence, the power LED gives one long blink and returns to normal operation. While the Device Mode key is locked, the Direct Code Setup and Move Mode functions are not available. E-52 English Mode key IR punch-through The Mode key IR punch-through default is ‘on’. Example: To set the Mode key IR punch- through to aMP 1. Press and hold S until the power LED blinks twice: **. 2. Press 971. The power LED blinks twice: * *. 3. Press A to punch through IR from it. Now, whenever you press and release a Mode key, the IR data assigned to AMp is transmitted, no matter what the current mode is (i.e. it ‘punches through’ any other device). To cancel Mode key IR punch-through 1. Press and hold S until the power LED blinks twice: **. 2. Press 971. The power LED blinks twice: * *. 3. Press S until the power LED blinks twice: **. Resetting the CR102 Resetting the CR102 will erase all learned functions across all modes, as well as some other programmed functions like Macros. It will not reset the Device Mode keys; these will remain programmed to your choice of component. 1. Press and hold S until the power LED blinks twice: **. 2. Press 980. The power LED blinks four times: ****. 3. Press and hold S until the power LED blinks twice: **. 4. Press 993. 5. Press A. The power key LED blinks twice: **. 6. Press and hold S until the power LED blinks twice: **. 7. Press 971. The power LED blinks twice: * *. 8. Press A. The power key LED blinks twice: **. Command summary direct code setup (e.g. AV mode, NNNN=code number) aS** NNNN **P Library search (e.g. AV mode) aS991**P[ until unit turns off S to save Code blink back a S 9 9 0** 1 count blinks for first N 2 count blinks for second N 3 count blinks for third N 4 count blinks for fourth N Code learning (e.g. AV mode fast forward key) S**975**a(* (many rapid blinks) (Press key on original remote that you wish to copy) **S** delete a learned function (e.g. AV mode fast forward key) S**975**a((** delete all learned functions with a device (e.g. AV mode) S**975aa Creating macros (e.g. SRCH key) S**995haPwPzPS ** deassign macro S**995hS** key mover (e.g. SAT mode, DISP key to MENU key) zS**994DU Mode mover (e.g. change SAT to TV(AV)) S**992az Restore device mode (e.g. restore SAT) S**992zz Locking/unlocking a mode (e.g. DVD mode) dS**982** (i.e. two blinks for lock) dS**982**** (i.e. four blinks for unlock) Cancel all volume punch-through S**993+**** Restore volume punch-through S**993A** Mode key IR punch-through S**971**A Cancel mode key IR punch-through S**971**S** NOTE As elsewhere in this Handbook, a single ‘blink’ of the red LED behind the power button is indicated by the symbol *. Device codes The tables that begin on page 58 (in the final section of this Handbook) list the four-figure codes for different manufacturers’ devices. Use these when setting your CR102 up to control your devices, as described in Method 1 (see page 25). If more than one code number is listed, try the first number. If the results are unsatisfactory, continue trying the numbers for that manufacturer to get the best ‘fit’ with the functionality required. If the manufacturer of your equipment is not listed, you can try Method 2, the Library Search (see page 25). This allow...
Otros modelos de este manual:El receptor y el amplificador - FMJ AVR600 (1.1 mb)