Iniciar sesión:
Votos - 3, Puntuación media: 3.3 ( )

Manual de usuario Honda Power Equipment, modelo MT50B

Fabricar: Honda Power Equipment
Tamaño del archivo: 1.09 mb
Nombre del archivo: 619748.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


4. Exercise caution to avoid slipping or falling. 5. If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble. 6. Stop the engine when leaving the operating position, before unclogging the tines, and when making any repairs, adjustments, and inspections. 7. Take all possible precautions when leaving the machine unattended. Disengage the power take off, lower the attachment, shift into neutral, stop the engine and remove the key. 8. Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors. 9. Do not run the engine indoors. Exhaust fumes are dangerous. 10. Never operate the tiller without proper guards, plates, or other safety protective devices in place. 11. Keep children and pets away. 12. Do not overload the machine capacity by attempting to till too deep at too fast a rate. 13. Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing. 14. Never allow bystanders near the unit. 15. Use only attachments and accessories approved by the manufacturer of the tiller. 16. Never operate the tiller without good visibility or light. 17. Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine. Maintenance and Storage 1. Keep machine, attachments, and accessories in safe working condition. 2. Check shear bolts, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working order. 3. Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure. BELT COVER, BELTS, AND PULLEY REF PART # QUAN DESCRIPTION 701 271686 1 Crankshaft Pulley, 5 hp 703 162035 1 Belt Bracket Assembly ( TP, RMT) 162067 Belt Bracket Assembly (RMT55H) 703-A 359215 Belt Bracket Assembly (MT) 704 272201 1 Belt, V Drive for Units with 9” Pulley 272213 1 Belt, V Drive for Units with 7” Pulley 712 336671 1 Pulley, 9” for TP and MT 336665 1 Pulley, 7” for RMT 714 463017 1 Key, 3/16” x 3/4” Woodruff #9 715 130733 1 Guard 130791 1 Guard, Round MT model 716 359341 1 Bracket, Lower for RMT 359216 1 Bracket, Lower for MT 719 359383 1 Key, Pulley 720 415562 2 Set Screw 5/16” 801 400176 2 Self Tapping Bolt 1/4” x 1/2” 802 400104 1 Bolt, 1/4” - 20 x 1/2 808 Engine 812 400235 1 Screw, 1/2” x 24 x 3/4” 815 359343 1 Bracket, Upper 823 445245 2 Flat Washer 824 446145 1 Lockwasher, 1/2” Heavy 825 444715 1 Locknut, 1/4” - 20 826 443106 4 Nut, 5/16” - 18 827 400194 4 Screw, 5/16” - 18 x 1 1/2” Hex Head Cap 828 446136 4 Lockwasher, 5/16...

Otros modelos de este manual:
Herramientas de jardín - MT50B (1.09 mb)
Herramientas de jardín - RMT50B (1.09 mb)
Herramientas de jardín - RMT50IC (1.09 mb)
Herramientas de jardín - RMT55H (1.09 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría