Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. FORM NO. 48070 (REV. 5/20/08) PRINTED IN U.S.A. 2 TABLE OF CONTENTS SAFETY RULES...........................................................3 FULL SIZE HARDWARE CHART.................................4 CARTON CONTENTS..................................................5 ASSEMBLY...................................................................5 OPERATION...............................................................12 MAINTENANCE.........................................................13 STORAGE..................................................................13 REPAIR PARTS ILLUSTRATION...............................14 REPAIR PARTS LIST.................................................15 PARTS ORDERING/SERVICE......................Back Page WARRANTY ONE YEAR FULL WARRANTY When operated and maintained according to the instructions supplied with it, if this Spiker Spreader fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or replacement if repair proves impossible). If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179 MODEL NUMBER: 486.24331 SERIAL NUMBER: __________________ DATE OF PURCHASE: __________________ The model number and serial numbers will be found on a decal attached to the hitch tube. You should record both the serial number and the date of purchase and keep in a safe place for future reference. SAFETY Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • Read this owner's manual before attempting to assemble or operate the spiker/spreader. • Read the towing vehicle owner's manual and know how to operate the tractor before using the spiker/spreader attachment. • Do not allow anyone to ride on or sit on the spiker/spreader. • Never allow children to operate the tractor or spiker/spreader attachment. • Do not allow adults to operate the tractor or spiker/spreader without proper instructions. • Read the chemical label for instructions and cautions for handling and applying chemicals. • Wear eye and hand protection when handling and using lawn chemicals. • Always begin with the transmission in first (low) gear and gradually increase speed as conditions permit. Maximum towing speed - 10 M.P.H. • Do not drive too close to a creek or ditch and be alert for holes and other hazards which could cause you to loose control of the tractor and spiker/spreader. • Before operating the vehicle on any grade (hill) refer to the safety rules in the vehicle owner's manual concerning safe operation on slopes. Stay off steep slopes! • Follow maintenance and lubrication instructions as outlined in this manual. Look for this symbol to point out important safety precautions. It means — Attention!! Become alert!! Your safety is involved. HARDWARE PACKAGE CONTENTS ABCDEFKLMGHIJSHOWN FULL SIZEOPQNOT SHOWN FULL SIZENTUSWXFFDDGGBBCCEEAAZYHHIIRV REF. QTY. DESCRIPTION A 2 Hex Bolt, 1/2" x 4" B 3 Hex Bolt, 5/16" x 2-1/4" C 2 Hex Bolt, 5/16" x 2" D 2 Hex Bolt, 5/16" x 1-3/4" E 2 Hex Bolt, 5/16" x 1-1/2" F 1 Hex Bolt, 5/16" x 1" G 1 Hex Bolt, 1/4" x 1 1/4" H 1 Hex Bolt, 1/4" x 3/4" I 1 Carriage Bolt. 5/16" x 1-3/4" J 2 Self-Tapping Screw K 6 Nylock Hex Nut, 1/4" L 10 Nylock Hex Nut, 5/16" M 2 Jam Hex Nut, 1/2" N 2 Nylock Jam Hex Nut, 1/2" O 2 Flat Washer, 1/4" P 2 Nylon Washer, 21/64" Q 4 Flat Washer, 5/16" R 4 Flat Washer, 1/2" REF. QTY. DESCRIPTION S 10 Flat Washer, 5/8" T 3 Cotter Pin, 1/8" x 1-1/2" U 1 Cotter Pin, 3/32" x 3/4" V 1 Hair Cotter Pin, 1/8" W 1 Chain with Connector X 13 Flanged Bearing Y 1 Compression Spring Z 1 1/4" Thick Spacer AA 2 Short Spacer Tube BB 5 Long Spacer Tube CC 1 Flow Control Link DD 1 Ferrule EE 1 Control Lever Grip FF 1 Height Adjustment Grip GG 1 Plastic Wing Nut HH 1 Flat Head Hitch Pin, 3/8" II 1 Flow Plate Spring ASSEMBLY CARTON CONTENTS 1. Chain Cover 2. Flow Control Lever 3. Center Brace 4. Hopper Assembly 5. Hitch Tube (2) 6. Lift Handle 7. Spike Disk (7) 8. Drive Disk Assembly (2) 9. Wheel (2) 10. Transport Tube Assembly 11. Hitch Bracket (2) 12. Spiker Shaft Assembly 1238121094675 11 • Assemble the grip onto the lift handle. See figure 2. • On the right side, insert a 5/16" x 1-3/4" hex bolt through a 5/16" flat washer and then through the rear hole in the hopper and the hitch tube. Assemble the transport tube and then the lift handle onto the bolt and secure with a 5/16" nylock hex nut. Do not tighten yet. See figure 2. • Assemble a 5/16" x 1" hex bolt and 5/16" nylock hex nut to the bottom hole in the transport tube assembly and the lift handle. Do no...