Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Standard, 32-1/2 In. with Tine Extensions TILLING DEPTH 0 to 7 Inches, Adjustable ATTACHMENT TO HUB: Bolted TO SHAFT: Pin and Spring Clip DRIVE INNER: Pin Type Floating Drive OUTER: Pin and Torsion Plate Floating Drive SPEED 75 RPM at Full Engine Speed DEPTH BAR TYPE Pivots in Reverse ATTACHMENT Pin and Spring Clip ADJUSTMENT 0 to 7 Inches Tilling Depth CONTROLS LOCATION FORWARD CLUTCH: Right Handle, Top REVERSE CLUTCH: Left Handle, Bottom THROTTLE: Center Mounted HANDLE POSITION LOCK: Center & Both Sides REWIND STARTER AND CHOKE: On Engine HANDLES TYPE: Three-Position Swing with Lock HEIGHT: Adjustable, Three-Positions CHASSIS FRAME Heavy-Duty, Electrically Welded with Cross-Bracing TIRES 10 x 1.75 Semi-Pneumatic WHEEL BEARINGS Solid, Sintered Iron WHEEL SCRAPERS Frame Mounted, Adjustable OVERALL DIMENSIONS LENGTH 51 Inches WIDTH 26 Inches (Without Tine Extensions) HEIGHT TO TOP OF HANDLE: 38-1/4 Inches TO TOP OF ENGINE: 27-3/4 Inches WEIGHT NET (DRY): 133 Lbs. SHIPPING (DRY): 143 Lbs. SAFETY FIRST In addition to the basic safety rules appearing on the inside front cover, follow these safety tips. H Release both clutch levers and stop the engine before cleaning the tines, removing obstacles, making adjustments or when leaving the operating position. ■ Never allow children or pets to cross your path or cause distractions in the area while operating. ■ Use caution to avoid slipping or falling, especially when operating in reverse. CONTROLS 1. THROTTLE LEVER: To adjust engine speed or to stop the engine, move the lever forward or back. 2. FORWARD CLUTCH LEVER (RIGHT HANDLE): Squeeze the lever to engage the forward drive, release to stop. 3. REVERSE CLUTCH LEVER (LEFT HANDLE): Squeeze lever to engage reverse drive only after releasing FORWARD lever. CAUTION NEVER GRIP BOTH FORWARD AND REVERSE CLUTCH LEVERS AT THE SAME TIME. SERIOUS DAMAGE MAY RESULT 4. HANDLE POSITION KNOB: Pull up on knob to swing handles to left or right position and release to lock handles in place. Be sure that locking lever is firmly engaged in the notch on the lock plate before proceeding. HANDLES SWUNG TO RIGHT POSITION 5. HANDLE HEIGHT: The handle support assembly has several mounting holes to allow adjustment of the handle height to three positions. Experience will show which position is most convenient. Remove the handle mounting bolts, nuts and lockwashers to reposition handles. NOTE Whenever the handle height is changed, the forward and reverse clutch control wires must be readjusted to suit. See “Adjustments”. READJUST CLUTCH WIRES BEFORE STARTING Before attempting to start the engine, read the engine owner’s manual thoroughly. Be sure to have on hand sufficient quantities of clean, fresh “Regular” grade gasoline and SAE 30 grade MS engine crankcase oil. 3 1. Remove the crankcase filler cap, located on the left side of the engine, by turning counterclockwise. Fill with SAE-30 oil until level with the top of the neck. Reinstall filler cap securely. Check the oil level every time fuel is added. 2. Remove the fuel tank filler cap and fill tank completely with clean, fresh leaded or non-leaded “Regular” grade automotive gasoline. DO NOT MIX OIL WITH GASOLINE. CAUTION GASOLINE IS HIGHLY INFLAMMABLE. AVOID OVERFILLING AND WIPE UP ANY SPILLED FUEL. ALLOW NO OPEN FLAME, SMOKING OR MATCHES NEAR THE AREA WHEN REFUELING. Replace the filler cap securely. Store gasoline only in small quantities - prolonged storage produces gum and harmful deposits. If it is necessary to store gasoline for long periods, add STA-BIL brand gasoline stabilizer, available at your Simplicity dealer. (See “Off-Season Storage.”) STARTING 1. Move the throttle lever 1/2 way forward. 4 2. Pull choke plunger out to “CHOKE” position. 3. Grasp the recoil starter handle firmly in your right hand and pull sharply straight out to start the engine. After the engine starts, return the choke to “OFF” position. If the engine fails to start after 4 or 5 pulls it may be flooded. Return the choke to “OFF” position and pull recoil starter handle to clear the excess fuel. Always return the handle by hand-DO NOT RELEASE THE HANDLE WITH THE ROPE EXTENDED. To stop the engine, pull the throttle lever all the way back. 1. The depth bar setting determines the depth of tilling. To till 4 to 6 inches deep, install the bar mounting pin in the second or third hole from the TOP. Simply pull out the hairpin cotter to change pin location. Be sure to install the bar with the digging tip as shown. THE DEEPER THE DEPTH BAR IS SET INTO THE SOIL, THE DEEPER THE TINES WILL DIG. PIN 2. Check to be sure that the wheels are mounted in the UPPER holes of the frame legs as shown. Adjust the wheel scrapers to clean accumulated soil from the tires. This will vary according to conditions. Loosen the mounting bolts to raise or lower the scrapers. When the best effect is obtained, tighten the bolts securely. A good initial se...