Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario Airlink101, modelo AGIGA5SW-B

Fabricar: Airlink101
Tamaño del archivo: 25.9 kb
Nombre del archivo: q-agiga5sw-b.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


1A Quick Installation Guide 5-Port 1000BASE-T Gigabit Ethernet Switch Model #AGIGA5SW-B Package Contents: • 5-Port Gigabit Switch • Power Adapter • Quick Installation Guide Section 1 Introduction This user’s guide tells you how to install your 5-Port 1000BASE-T Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. The 5-Port 1000BASE-T Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. Before you begin, please verify that you have all the parts listed in the Package Contents. Section 2 Connecting the Switch The 5 Gigabit Ethernet ports of 10/100/1000Mbps Auto-Negotiation ports of the switch support automatic MDI/MDIX crossover detection, which allows fortrue “plug-and- play” capability. With the Auto-MDI function, you can simply plug in an Ethernet cable into the switch without worrying about if the other end of the cable is connected to a network adapter or to another switch or hub. Connect the AGIGA5SW-B to an end note which includes PCs outfitted with a 10, 100, or 1000 Mbps RJ-45 Ethernet Network Interface Card (NIC) and most routers. An end node can be connected to the Switch via a twisted-pair Category 3, 4, 5, or 5e UTP/STP cable. The end node can be connected to any of the ports of the Switch. LED Indicators 1) The 5-port switch has built-in LED indicators: PowerLED • Solid Green - Power On Speed LED (Top) • Solid Green -1000 Mbps • Solid Amber - 100 Mbps •Off-10 Mbps Link/Act LED (Bottom) • Solid Green - Link • Blinking Green - Activity 2) Cable Diagnostic Operation indications (during the switch booting up): Open, Short, orlmproperTermination • Speed LED: Amber • Link/Act LED: Off Cable connection good • Speed LED: Green • Link/Act LED: Off Section 3 Technical Specifications Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 100BASE-TX IEEE 802.3x Flow Control Ports 5 x Auto-Negotiation 10/100/1000Mbps RJ45 ports Transfer Rate Full/Half duplex transfer mode for 10/100Mbps Full duplextransfer mode for 1000Mbps Chipset Broadcom MAC Address 4K Memory 128KB Forwarding Store and Forward Method Protocol CSMA/CD Jumbo Frame 9726 bytes (only supports in 1000M mode) Power 7.5V DC/1 A or 5V/2A Operation Temperature: 0 ~ 40 °C Environment Humidity: 5% to 95% non condensing EMI CSA, FCC, and CE Section 4 Technical Support E-mail: support@airlink101 .com Toll Free: 1-888-746-3238 Web Site: 01 .com Copyright© 2007AirLinkl 01®. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All rights reserved. AirLinkl 01®, the stylized AirLinkl 01® logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLinkl 01 ®. All other product or service names are the properly of their respective holders. AirLinkl 01 ® products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights....


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría