Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
1.0 Step 2 Pull out the front panel. Rü1fei Quick Installation Guide Office NAS 3.5” IDE/SATA Network Attached Storage Model # ANAS350 Package Contents: Office NAS Vertical Stand Power adapter Ethernet Cable Utility CD Quick Installation Guide Screws (4) Rubber feet (4) Section 1 Hard Drive Installation WARNING: This Network Attached Storage device is not hot-swappable. Please make sure that it is turned off and not connected to the power outlet when performing the following assembly procedure. Step 1 Unfasten the two screws at the rear side of the device, and pull out the back cover. Step 3 Put the 3.5-inch IDE or SATA hard disk into the slot, and connect the proper data cable for your hard drive. (The red cable is used for SATA and the gray one is for IDE). Step 3a IDE Step 3b SATA Step 4 Secure the drive to the metal plate on the sides with the provided four screws. Step5 Re-attach the front panel to the device. Step 6 Re-attach the back panel to the device and secure it with the two screws removed in step 1. Step 7 Connect Office NAS to your router or your computer with the provided Ethernet cable, and connect the supplied power adapter. Plug the power cord into a power outlet. (Note: connecting this device to your computer directly is not recommended since many features will not be able to function.) Connect Plug i * Step 8 Turn it on by pressing the On switch in the back of the device. Verify the Power and LAN LEDs are lit. Congratulations! The hard drive installation is complete. For more information about this product, please refer to the User's Manual in the provided CD. Continue on Back Section 2 Connecting to Office NAS Step 1 To access Office NAS, double-click on My Computer or open Windows Explorer and then type in “Uairnas” into the Address bar and press Enter. 7 My Computer File Edit View Favorites Tools Help Back * O Æ P Search Folders Address \\airnas| Step 2 Click on the Storage folder to begin accessing your files and using Office NAS to store/backup your data. Section 3 (optional Configuring Office NAS You can configure Office NAS using eitheryourweb browser (Internet Explorer or Firefox) or using the Utility provided on the installation CD. Step 1 To use your web browser, open up the browser and in the Address bar type in and press Enter or hit the Go button. ■Э about:blank - Microsoft Internet Explorer File Edit View Favorites Tools Help Back Ö 0 Ш ft Search l^jfF F°rites 1 ¡Favorites [ Address | Step 2 When prompted fora username and password, type in admin for the username and admin for the password in lowercase letters. Connect to 192.1 68.1.51 Airlinkl □ 1 User name: Password: admin •I Remember my password OK Cancel Step 3 Please consult the User’s Manual located on the installation CD for more informtion on how to conifigure your new Airlinkl 01 Office NAS. For more information on how to use the Utility (optional), please consult Section 3 in the User’s Manual. Section 4 Technical Support E-mail: support@airlink101 .com Toll Free: 1-888-746-3238 Web Site: 01 .com ‘Actual data through put will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. Copyright©2006 AirLinkl 01 ™ All rights reserved. AirLink101, the stylized AirLinkl 01 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLinkl 01. All other product or service names are the properly of their respective holders. AirLinkl 01 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights....