Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
2 Package Contents & System Requirements 2.1 Package Contents 2.2 System Requirements 2.2.1 Win-CE based PDAs (Pocket PC Device) .. PDA with Windows Pocket PC 2002 and Windows Mobile 2003 with at least 32 MB memory. .. Secure Digital I/O (SDIO) capable slot, check with your PDA manual or manufacturer. Go to for PDA compatibility. .. Microsoft Active Sync should be installed. .. A standard 802.11b or 802.11g Wi- Fi approved Access Point (AP)/Base station. 3 Introducing WL11-SD Card 3.1 WL11-SD client features and benefits The WL11-SD Client is a wireless network card that complies with the IEEE 802.11b standard on wireless LANs. .. Supports data rates up to 11 Mbps. Text Box: l One AmbiCom WL11-SD (Wireless LAN card) l One User Manual, Drivers and Configuration utility CD-ROM l Quick Installation Guide If you miss any of these items please contact your reseller .. Compatible with wireless LAN system based on Direct Sequence Spread Spectrum (DSSS) radio technology that complies with the “IEEE 802.11b standard on wireless LANs”. .. Support Ad hoc and Infrastructure modes for easy wireless communication. .. Automatic Transmit Rate Select mechanism in the transmit range of 11, 5.5, 2 and 1 Mbps. .. Supports Advanced Security 128 bit Wired Equivalent Privacy (WEP) data encryption, 802.1X and WPA. Note: * WPA security is only support on Windows Mobile 2003 Second Edition * 802.1x and WPA are not supported on CD V3.0 of software on ETSI Domain. .. Efficient Power Management. .. Roaming over multiple channels. .. Working range up to 400 meters in an open environment and 100 meters in a close environment. 3.2 WL11-SD Wireless Network Scenarios The WL11-SD Client enables you to: .. Connect your computer to a Peer- to- Peer workgroup of wireless computing devices. .. Connect your computer to a Small Office/Home Office (SOHO) network or Wireless Hot Spot that has Wi- Fi Access Points. .. Connect your computer to a Local Area Network (LAN) Infrastructure. 3.2.1 Peer-to-Peer (Ad-Hoc) Workgroup The Peer-to-Peer workgroup configuration enables you to quickly set up a small wireless workgroup, where the workgroup participants can exchange files using features like “Files and Printer Sharing” as supported by Microsoft Networking. You can use this option to setup a temporary or ad-hoc network in environments where no access points are available (for example in Small Office/Home Office (SOHO) environments). As long as the stations are within range of one another, this is the easiest and least expensive way to set up a wireless network. 3.2.2 Home Networking With AmbiCom’s WL11-SD, wireless access to the Internet or other devices is at your fingertips. All you need to do is connect the WL11-SD to an existing Access Point or Router that may be connected to the broadband or dial-up connection or Wireless Hot Spot and now you are ready to: .. Share files and printers* .. Access the Internet .. Listen to internet radio .. Watching online movie .. Reading and replying email .. And more * Some application might require installing third party software; see your PDA operating manual 3.2.3 Enterprise Networking With the Wi-Fi certified Access Point in the corporate network system, you can connect to a corporate Local Area Network (LAN) infrastructure to have wireless access to all network facilities. LAN Infrastructures may either be .. Stand- alone wireless LANs* .. Wireless network infrastructures connected to an existing Ethernet network. * Some application might require installing third party software; see your PDA operating manual 3.3 About the WL11-SD CD-ROM The WL11-SD CD-ROM contains both software and documentation for the WL11-SD card. If you wish to install the WL11-SD driver software, turn to Section 4 "Installing your WL11-SD Client Driver" and follow the instruction. 4 Installing your WL11-SD Client Driver 4.1 Installation of the WL11-SD driver to the Pocket PC .. Connect your PDA to your computer and make sure ActiveSync has established for a connection between the two devices. .. Insert the WL11-SD Setup CD into your CD-ROM. The following Installation wizard will pop up to guide you through the process. Unless you have deactivated the auto-run feature in Windows, the following screen should appear automatically. If this screen does not appear automatically, you can access the installation program by clicking the Start button and selecting Run. In the drop down box provided, type “D:\ Setup.exe” (“D” represents the CD-ROM drive). .. Click WL11-SD to start your installation. .. Please select the appropriate operating system and region. .. Click Next. .. Click YES. You will see the following Windows. .. Click YES to accept the installation. Continue follow the installation wizard. .. Click Finish to complete the driver installation. 5 WL11-SD Configuration Utility 5.1 Basic Setup When WL11-SD card is inserted, it should connect to the available Access Point (AP) automatically. If more than one AP is available ...
Otros modelos de este manual:Equipo de red - Wireless LAN SD Card WL11-SD (1.77 mb)