Iniciar sesión:
Votos - 4, Puntuación media: 5 ( )

Manual de usuario Adder Technology, modelo 4202023L1

Fabricar: Adder Technology
Tamaño del archivo: 1.02 mb
Nombre del archivo: 3d3b0f51-ba0e-49f4-8e66-cf75263d9760.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 © 2002 ADTRAN, Inc. All Rights Reserved. Printed in U.S.A. The following conventions are used in this manual. KOH Notes provide additional useful information. OUT... Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. IMPORTANT SAFETY INFORMATION When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for special disposal instructions. SAVE THESE INSTRUCTIONS iv Affidavit Requirements for Connection to Digital Services • An affidavit is required to be given to the telephone company whenever digital terminal equipment without encoded analog content and billing protection is used to transmit digital signals containing encoded analog content which are intended for eventual conversion into voice band analog signal and transmitted on the network. • The affidavit shall affirm that either no encoded analog content or billing information is being transmitted or that the output of the device meets Part 68 encoded analog content or billing protection specification. • End use/customer will be responsible to file an affidavit with the local exchange carrier when connecting unprotected CPE to a 1.544 Mbps or subrate digital service. • Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit requirements for subrate services are waived. v Affidavit for Connection of Customer Premises Equipment to 1.544 MBPS and/or Subrate Digital Services For the work to be performed in the certified territory of (telco name) State of County of I, (name), (business address), (telephone number) being duly sworn, state: I have the responsibility for the operation and maintenance of the terminal equipment to be equipment to be connected complies with Part 68 of the FCC rules except for the encoded analog content and billing protection specification. With respect to encoded analog content and billing protection: ( ) I attest that all operations associated with the establishment, maintenance and adjustment of the digital CPE with respect to encoded analog content and billing protection information continuously complies with Part 68 of the FCC rules and Regulations. ( ) The digital CPE does not transmit digital signals containing encoded analog content or billing information which is intended to be decoded within the telecommunications network. ( ) The encoded analog content and billing protection is factory set and is not under the control of the customer. I attest that the operator(s) maintainer(s) of the digital CPE responsible for the establishment, maintenance and adjustment of the encoded analog content and billing information has (have) been trained to perform these functions by successfully having completed one of the following (check appropriate blocks): ( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode analog signals; or ( ) B. A training course provided by the customer or authorized representative, using training materials and instructions provided by the manufacturer/grantee of the equipment used to encode analog signals; or connected to 1.544 Mbps and/or subrate digital services. The terminal vi ( ) C. An independent training course (e.g., trade school or technical institution) recognized by the manufacturer/grantee of the equipment used to encode analog signals; or ( ) D. In lieu of the proceeding training requirements, the operator(s)/maintainer(S) is (are) under the control of a supervisor trained in accordance with_(circle one) above. I agree to provide_(telco’s name) with proper documentation to demonstrate compliance with the information in the preceding paragraph, if so requested. _Signature _Title _Date Subscribed and sworn to before me This_day of_, 20_ Notary Public My commission expires:_ vii FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of the FCC rules. There is a label on the equipment that shows the FCC registration number and Ringer Equivalence Number (REN) for this equipment, if applicable. If required, this information must be given to the telephone company. 2. The following information may be required when applyin...

Otros modelos de este manual:
Equipo de red - 4202023L2 (1.02 mb)
Equipo de red - 4202023L3 (1.02 mb)
Equipo de red - 4202023L4 (1.02 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría