Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
To avoid injury or electrical shock, do not touch exposed connections or components while the power is on. To prevent damage to the server, read the information in this document for selection of the proper input voltage. Do not wear rings or wristwatches when troubleshooting electrical circuits. To avoid fire hazard, use only the specified fuse(s) with the correct type number, voltage, and current ratings. Only qualified service personnel should replace fuses. Qualified service personnel should be properly grounded when servicing the unit. Qualified service personnel should perform a safety check after any service is performed. Motherboard Battery Precautions Caution: The battery on the motherboard should not be replaced without following instructions provided by the manufacturer. Only qualified service personnel should replace batteries. The battery contains energy and, as with all batteries, a malfunction can cause heat, smoke, or fire, release toxic materials, or cause burns. Do not disassemble, puncture, drop, crush, bend, deform, submerge or modify the battery. Do not incinerate or expose to heat above 140°F (60°C). There is a danger of explosion if the battery on the motherboard is installed upside down, which will reverse its polarities. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF THE USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS. ATTENTION: IL Y A DANGER D’EXPLOSION S’IL Y A REPLACEMENT INCORRECT DE LA BATTERIE, REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MEME TYPE OU D’UN TYPE EQUIVALENT RECOMMANDE PAR LE CONSTRUCTEUR. METTRE AU REBUT LES BATTERIES USAGEES CONFORMEMENT AUX INSTRUCTIONS DU FABRICANT. WARNING: Users in Member States should consult Article 20 of Directive 2006/66/EC of the European Parliament and of the Council before disposing the motherboard battery. Install the Server Step 1: Setup Procedures This step requires you to link the workstation to the ER. You have the option of using the text-based Quick Start setup procedures described in Step 1A, the Administrator console setup procedures described in Step 1B, or the LCD panel setup procedures described in Step 1C. Quick Start Setup Requirements The following hardware can be used for the Quick Start setup procedures: ER with AC power cord either one of two options: PC monitor with AC power cord and keyboard, or PC laptop computer with HyperTerminal and serial port cable (and USB DB9 serial adapter, if there is no serial port on your laptop) Go to Step 1A to execute Quick Start Setup Procedures. Administrator Console Setup Requirements The following hardware is required for the Administrator console setup procedures: ER with AC power cord CAT-5E crossover cable PC laptop computer, or PC monitor with AC power cord and keyboard Go to Step 1B to execute Con...
Otros modelos de este manual:Equipo de red - Enterprise Reporter HL-002-002 (3.17 mb)
Equipo de red - Enterprise Reporter HL-002-002 (3.17 mb)
Equipo de red - Enterprise Reporter HL-002-002 (3.17 mb)
Equipo de red - Enterprise Reporter HL-022-002 (3.17 mb)