Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
-17-inch LCD Console Unit (1U/8port) [N8143-69F] Consists of the following components: Switch Unit Connection Cable Set (1.8m) [K410-119(1A)] Keyboard (no ten-key numeric keypad) Optical Mouse 17-inch LCD 1280x1024 max. Full color Server Switch Unit -Supports up to eight servers. -Allows the connection of up to 64 servers by cascading the Server Switch Units [N8191-10F]. Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) 12 N8804-009 2-channel 1000BASE-T controller set LAN Network Be sure to connect four physical LAN interfaces to the network HUB. Each of two pairs of 1000BASE-T on the CPU/IO module is redundant configuration. PCI-Ex slot PCI-Ex slot CPU/IO module#0 CPU/IO module#1 Network Optional LAN cards 2x Standard LAN ports per CPU/IO module. A set of two cards •on the same PCI slot# of each CPU/IO module CPU/IO module#0 Onboard CPU/IO module#1 Onboard LAN port #1 LAN port #2 LAN port #2 LAN port #1 1000BASE-T 1000BASE-T 1000BASE-T 1000BASE-T [Note for optional LAN cards] N8804-007 is not supported on R320b-M4/R320a-E4 Windows Server 2008 R2 model. Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) PCI-Ex slot PCI-Ex slot CPU/IO module#0 CPU/IO module#1 Storage D3-10/D4-30/D8-10/D8-20/D8-30/E1-10 -Be sure to procure the control software according to the sales region. Note! Direct connection NEC Storage: -D3-10/D4-30/D8-10/ D8-20/D8-30/E1-10 Fibre Channel board set (8Gbps) [N8803-038] A set of two cards Fibre Channel cable set 5m [NF9320-SJ01] 10m[NF9320-SJ02] 20m[NF9320-SJ03] 50m[NF9320-SJ04] [Notes for FC controller] On R320a-E4, it operates at 4Gbps bandwidth due to system bus performance. N8803-035 Fibre Channel board set (4Gbps) is not supported. Connection via Fiber Channel switch: To be supported in November. Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) PCI-Ex slot CPU/IO module#0 Tape backup Device Expansion Unit [N8141-41F] SCSI cable 1m [K410-94(01)] 2m [K410-94(02)] SCSl controller [N8803-036] Power Unit [N8181-54F] N8151-51A Built-in DAT(DAT72)(36GB) N8151-59 Built-in LTO(200GB) N8151-76 Built-in LTO(400GB) Device Expansion Unit [N8141-41F] Double backup configuration Device Expansion Unit [N8141-41F] Single backup configuration FT server FT server CPU/IO module #0 CPU/IO Module #1 CPU/IO Module #0 CPU/IO Module #1 SCSI cable [K410-94(01)] [K410-94(02)] SCSI cable [K410-94(01)] [K410-94(02)] SCSI controller SCSI controller [Notes for double backup] (1)Backup job There are the following notes for double backup configuration. Configure 2 sets of SCSI controller/SCSI cable/Backup device. Two backup devices are recognized separately by OS. When automatically backup by a job, make a job for each backup device so that each device can backup. In case one device fails, the other backup device can backup. (2) Note for BrightStor ARCserve backup When making a job, backup is not performed if you put [*] in the [group] of destination tab. Be sure to configure two backup jobs with setting the device group at the group on the destination tab and the media definition as “*”or the name of the media. [Notes for single backup] Configure 1 set of SCSI controller/SCSI cable/Backup device. In case a CPU/IO module or backup device fails, backup is not possible until the failed part is repaired or replaced. When two servers share a Device Expansion Unit [N8141-41F] R320a-E4,R320b-M4 R320a-E4,R320b-M4 Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Device Expansion Unit [N8141-41F] Double backup configuration Device Expansion Unit [N8141-41F] Single backup configuration FT server FT server CPU/IO module #0 CPU/IO module #1 CPU/IO module #0 CPU/IO module #1 N8151-101 Built-in LTO(LTO2) N8151-102 Built-in LTO(LTO3) N8151-90 Built-in LTO(800GB) N8151-77 Built-in LTO(800GB) SAS cable 2m [K410-168(02)] SAS cable K410-168(02) SAS cable K410-168(02) PCI-Ex slot CPU/IO module#0 SAS controller SAS controller [N8803-037] SAS controller Device Expansion Unit [N8141-41] Internal SAS cable [K410-163(00)] Power Unit [N8181-54F] When two servers share a Device Expansion Unit [N8141-41F] R320a-E4,R320b-M4 R320a-E4,R320b-M4 [Notes for double backup] (1) Backup job There are the following notes for double backup configuration. Configure 2 sets of SAS controller/SAS cable/Backup device. Two backup devices are recognized separately by OS. When automatically backup by a job, make a job for each backup device so that each device can backup. In case one device fails, the other backup device can backup. (2) Note for BrightStor ARCserve backup When making a job, backup is not performed if you put [*] in the [group] of destination tab. Be sure to configure two backup jobs with setting the device group at the group on the destination tab and the media definition as “*”or the name of the media. [Notes for single backup] Configure 1 set of SAS controller/SAS cable/Backup device. In case a CPU/IO module or backup device fails, backup is not possible until the failed part is repaired or replaced. Express5800/R320a-E4, R320b-M4(...
Otros modelos de este manual:Equipo de red - EXPRESS5800 R320A-E4 (362.43 kb)