Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Click on finish > Your Wireless Notebook Adapter 11g True Turbo 108 Mbps is ready for use after the reboot Connect Connect Connect to your network Start Philips Wireless Network Manager program Double click on the tray icon EN If the Philips Wireless Network Manager does not start, double-click this icon View the available wireless networks 1 Select Site Survey 2 Click on Scan 3 Double click on your wireless Network Name When asked: Input Security settings 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manual of your base station on how to identify these security settings. TIP for more information on encryption see “Configuration – sub-tab Security“ on page 14. Activate the current profile Select Apply Changes Advanced Advanced EN Securing your wireless network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. Go to security settings 1 Select Configuration tab 2 Select Security tab 3 Click on Security off, to switch it on Input Security settings 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manual of your base station on how to identify these security settings. TIP for more information on encryption see “Configuration – sub-tab Security“ on page 14. Activate the current profile Select Apply Changes Configure other devices Make sure other networked devices use the same Network Name (SSID), wireless mode and Security settings Setup of an Ad Hoc computer network Start Philips Wireless Network Manager program Double click on the tray icon EN If the Philips Wireless Network Manager does not start, double-click this icon. Create an Ad-Hoc wireless network 1 Click on Configuration 2 Click on Common 3 Enter the wireless Network Name (SSID) 4 Select Ad-Hoc as operating mode 5 Select the Network Type Go to the Security settings 1 Select Security tab 2 Click on Security off, to switch it on Setup the encryption 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key TIP for more information on encryption see “Configuration – sub-tab Security“ on page 14. Activate the current profile Select Apply Changes Configure other devices Make sure other networked devices use the same Network Name (SSID), Ad-Hoc wireless mode and Security settings Accessing your wireless network setting EN Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. What do the settings mean The Philips Wireless Network Manager program has five main tabs with information and settings. Note: The Wireless On/Off button appears on the bottom of every tab to give you control over enabling and disabling the wireless link. • Configuration The Configuration tab lets you manage your profiles, and gives you access to your wireless network and encryption settings. Select profile – A profile is a set of all settings needed for a particular wireless connection. If you want to change between wireless networks, you can simply switch from one saved profile to the other. Use the New, Save and Delete buttons for managing your profiles. Auto Save Profile On/Off When Auto Profile is On, the New profile and Save profile buttons will be disabled. After you Apply Changes a profile will automatically be created with your network settings The Configuration tab contains two sub-tabs: Common and Security. See below for an explanation of the settings of these sub-tabs. • Configuration – sub-tab Common Network Name – Input a wireless network name for the wireless network to which you want to connect. Alternatively, use the Site Survey tab to choose from the list of available Network Names. (Default: philips.) Operating Mode – Set the operation mode to Ad Hoc (Peer-to-Peer) for network configurations that do not have a Wireless Base Station, and to Infrastructure for configurations with a wireless base station. (Infrastructure is the default setting.) Transmit Rate – Auto will automatically negotiate the highest possible wireless network speed. Or set a lower speed manually. Lower speeds will give better range. Channel – If you are setting up an Ad Hoc wireless network, set the channel number to the same radio channel as that used by the other wireless devices in your group. However, if you are connecting to a network via a base station, then the channel is automatically set to the channel of the base station to which the adapter connects. The Channel can only be set when the Operating Mode is set to Ad Hoc (Peer-to-Peer). Power Save – Click the box if you want to use power management to reduce your portable computer's consumption of battery power and still keep the computer available for imme...