Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
5. Click “Driver” and click “Update Driver” tab, then click “OK”. 6. A Hardware Update Wizard will appear. Insert the GearBox™ for Adapters CD into your CD-ROM drive. Select “Install from a list or specific location ( Advanced )”. Click “Next”. 7. When the following dialog box opens, select “Don’t search. I will choose the driver to install.”, then click “Next”. PC with network card installed Server with Model GA622T Copper Gigabit Ethernet Card installed Power plug NETGEAR Model FS510T Fast Ethernet Switch RJ-45 connector 10/100 Mbps 8. When Select Network Adapter box opens, click “Have Disk” then click “Next”. 9. The Install From Disk box will open. Type “D:\GA622T\WINXP” and click “OK”. 10. “NETGEAR GA622T Gigabit UTP Adapter” will appear in the model list. Click “Next”. 11. The next Windows appears with the following adapter name : NETGEAR GA622T Gigabit UTP Adapter. Click “Finish”. 12. Remove the GearBox™ for Adapters CD from the CD-ROM drive. The model GA622T Gigabit Adapter installation for Windows XP is now complete. Install the Windows 2000 Network Driver Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows CD-ROM at any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-ROM drive) and click on “OK”.Then follow the next step in the instructions. 1. A Found New Hardware Wizard dialog box will appear, indicating that Windows 2000 has found the adapter. Insert the GearBox™ for Adapters CD into your CD-ROM drive. Click “Next”. 3 INSTALL NETWORK DRIVER M 1 - G A 6 2 2 N A - 1 2. The install hardware device drivers dialog box will appear. Select “Display a list of the known drivers for this devices so that I can choose a specific driver”. Click “Next”. 3. The Hardware Type dialog box will appear. Select “ Network Adapters” then click “Next”. 4. When the Select Network Adapter box open, click “Have disk” then click “Next”. 5. Insert the the GearBox™ for Adapters CD into your CD-ROM drive. In the Install From Disk box, type “D:\” and click “OK”. 6. Highlight the “Netgear GA622T Gigabit UTP Adapter” in the model list. Click “Next”. 7. When the dialog box open, click “Next”. 8. Digital Signature Not Found dialog box may appear. Click “Yes”. 9. The next Windows appears with the following adapter name : NETGEAR GA622T Gigabit UTP Adapter. Click “Finish”. 10. Remove the GearBox™ for Adapters CD from the CD-ROM drive. The Model GA622T Gigabit Adapter installation for Windows 2000 is now complete. Install the Windows NT Network Driver Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows CD-ROM at any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-ROM drive) and click on “OK”. Then follow the next step in the instructions. 1. Turn on the power to the computer and start Windows NT. 2. From the Windows desktop menu, click the “Start” button, point to “Settings”, and then click “Control Panel”. 3. Double-click the Network icon. The Network dialog box opens, which displays a list of installed components. Click the “Adapters” tab, and then click “Add”. 4. If any previously installed GA622T Copper Gigabit Ethernet Card drivers are listed, you need to update the drivers as explained in the Reference Guide for the Model GA622T Copper Gigabit Ethernet Card. The Select Network Adapter dialog box opens. Click the “Have Disk” button. 5. The Insert Disk dialog box opens. Insert the GearBox™ for Adapters CD into the server’s CD-ROM drive. In the text box, type D:\GA622T and then click “OK”. 6. The Select OEM Option dialog box opens. Make sure NETGEAR GA622T Copper Gigabit Ethernet Card is highlighted, and then click “OK”. 7. The driver is copied onto your system. The Network dialog box opens, then click “Close”. If other cards in your server use TCP/IP bindings, the Microsoft TCP/IP Properties dialog box opens. Set any necessary TCP/IP configurations, and then click “OK”. 8.When prompted to restart your computer, click “Yes”. The Model GA622T Gigabit Adapter installation for Windows NT is now complete. 4 TEST YOUR NETWORK CONNECTION To verify your installation: 1. Double-click “My Computer” on the desktop, double-click “Control Panel”, and then double-click “System”. 2. Click “Hardware” and click “Device Manager” tab, and then double-click “Network adapters”. 3. Double-click “NETGEAR GA622T Gigabit UTP Adapter”. A message will appear describing the status of the device. If there is a problem with the installation of the driver, an exclamation point will appear next to the “NETGEAR GA622T Gigabit UTP Adapter”. Try rebooting your computer. If the problem persists, call 1-888-NETGEAR for free technical support. 5 ENJOY BEING CONNECTED! Features Your GA622T card provides you with the following key features: • Up to 1000 Mbps speed using Cat 5 cables • 64-bit PCI bus with 32-bit capability • Flexible 100/1000 Mbps capability • Includes proven Gigabit controller technology • No fiber cables neces...