Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Equipo de red - PS121v2 (5.62 mb)
Equipo de red - PS121v2 (973.25 kb)
Resumen del manual
Estimated Completion Time: 20 minutes for each printer; 10 minutes for each computer. Overview When you finish the installation, your network will resemble the following illustration. Router Computers Printer Print Server PS121 Resource CD What is on the Resource CD? • A setup wizard • Software utilities you use for controlling your print server and printer • The installation guide and user manual Note: Do not connect the USB Print Server until you are prompted to do so by the wizard on the CD. Installation First, Set Up the Print Server and a Single PC 1. Insert the Resource CD. If the wizard screen does not appear, double click autorun.exe on the CD. 2. Use the Smart Wizard to set up the print server. a. Click Install and Set Up the Print Server with This PC. The Smart Wizard installation assistant opens the print server manager wizard. b. Follow the onscreen instructions, and click Next when you are ready to proceed. c. Follow the step-by-step instructions to set up the PC connection to the printer via the print server. In the Finalize Setup stage, click Print Test Page to confirm that the installation was successful. d. Click Finish. The SmartWizard window opens to show the print server that you just set up. e. Check that the NETGEAR PS121v2 SmartWizard icon is in the System tray. Now, Set Up Additional PCs 1. Insert the Resource CD in an additional PC. If the wizard screen does not appear, double click autorun.exe on the CD. 2. Use the Smart Wizard to set up the PC. a. Click Set Up This PC to Use an Installed Print Server. The installation program attempts to detect the print server. b. Follow the on-screen instructions, and click Next when you are ready to proceed. c. Follow the step-by-step instructions to complete setting up the PC to use the printer you just set up on the print server. d. Verify connectivity to the printer. Scanning, Copying, or Faxing with the Print Server Before performing a task that requires manual intervention, such as scanning, copying, or faxing, use the SmartWizard to make the printer available to other PCs in your network. 1. Click the icon in the System tray to open the SmartWizard. 2. Click the Reserve button. 3. Then scan/copy/fax from your application as you would to a directly connected printer. 4. When you have finished, click Release to make the printer available to other PCs in your network. • The router is using a DHCP server, and the Print Server gets an IP Address Troubleshooting Tips Technical Support conflict This can happen if the PS121v2 is set to a static IP Address in the range used by the Here are some tips for correcting simple problems you may have. DHCP server. Make sure that you reserve the PS121v2 IP address in your router. If • The ACT activity LED is not lit on the print server you are using a NETGEAR router, see the Reference Manual on the Resource CD. It takes a few seconds for the status light to be lit. Check the power connection to the USB print server. Wait a minute and check the status light on the print server. • The printer is printing “garbage” characters If the printer does not match the printer driver in the operating system, then run the Windows Add Printer Wizard. • A Windows error message appears when printing Consult Windows help. • The print server is not found See if you can access it from other computers on your network. If so, troubleshoot your computer or network connectivity. If you are running a software firewall, disable it. This includes the Windows XP firewall — which may have been turned on during Windows upgrade or installation without you being aware of it. • Nothing is printing – Try printing from another computer. If this is successful, then there is a problem with your computer configuration, not the print server. Consult the computer and operating system documentation. – If the printer does not match the printer driver in the operating system, then run the Windows Add Printer Wizard. – For Windows 98 SE and Windows ME users, disable the printer's bidirectional feature, if it is turned on. – For Windows 2000 and Windows XP users, enable the printer bidirectional feature if it is not turned on. – If printer manager software is installed on Windows 98SE or ME, uninstall it. – See Troubleshooting in the User Manual on the Resource CD. April 12, 2007 Thank you for selecting NETGEAR products. After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to for product updates and web support. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipmen...