Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Equipo de red - JNR3000 (3.03 mb)
Equipo de red - JNR3000 (1.24 mb)
Resumen del manual
and the other end to the Internet port Wait approximately 2 minutes N300 Wireless Gigabit Router on your router. until your modem turns on. JNR3000 before connecting your modem to power. Modem or Cable Internet DSL N300 Wireless Gigabit Router Ethernet cable (not included) If your modem has a battery backup, first remove and reinsert the battery Package Contents: N300 Wireless Gigabit Router Step 4: Step 5: Step 6: Connect the power adapter to the Connect the router Open a browser. router, then plug it into an outlet. to your computer. If the Web page does not display, Wait until the wireless LED turns Use another Ethernet cable to establish close and re-open the browser Power adapter Ethernet cable a wired connection as shown in this diagram. solid green. and enter If none of the LEDs turn on, make sure that Optionally, connect wirelessly by using the in the address bar, or check the the Power On/Off button is in the ON position preset wireless security settings “Troubleshooting” section in (pushed in). located on the bottom label. the User Guide. Preset Wireless Security This product has a unique Wi-Fi network name (SSID) and network key (password). The default SSID and network key (password) are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset Wi-Fi network name (SSID) and network key (password). If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: Wi-Fi Network Name (SSID) _______________________________ Network Key (Password) _________________________________ If you change the preset wireless settings, record it here: Wireless Network Name (SSID) _______________________________ Network Key (Password) _____________________________________ If necessary to retrieve or update your password, type in a Web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. December 2011 Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product, and use it to register your product at Registration is required so you can use our telephone support service. Also go to for product updates, additional documentation, and support. For the free Live Parental Controls centralized Internet site filtering software for yourrouter, download from: For additional features, including Traffic Metering and Guest Access, log in to your router at: For complete DoC, go to the NETGEAR EU Declarations of Conformity website at For GNU General Public License (GPL) related information, go toWARNING: Do not stack equipment, or place equipment in tight spaces, in drawers, or on carpets. Make sure your equipment is surrounded by at least 2 inches of air space. Internet STATUS GOOD Network Map Number of devices 16 Parental Controls WiFi Connection STATUS Connected Router Settings Click here ReadySHARE Click hereClick here Download the free DesktopNETGEAR Genie Aut...