Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Equipo de red - WNDR3400v2 (3.24 mb)
Equipo de red - WNDR3400v2 (3.03 mb)
Equipo de red - WNDR3400v2 (1.24 mb)
Resumen del manual
Ethernet cable ( Wait approximately 2 minutes WNDR3400v2 and the other end to the Internet port until your modem turns on. on your ROUTER. Package Contents: Ethernet cable Router stand (two pieces) 2.4GHz5GHzModem DSL or Cable Internet N600 Wireless Router Power adapter (with stand attached) Step 4: 2.4GHz5GHz Connect the power adapter to the Attach the STAND to the ROUTER: ROUTER, then plug it into an outlet. 2.4GHzWait for the 2.4 GHz LED ( ) 1. Position the router so that the Power button is at the bottom and the USB to turn on. port is at the top. If none of the LEDs turn on, make sure the 2. Snap each piece of the stand onto a Power On/Off button is in the ON position Optionally, connect wirelessly by using “Tr oubleshooting” section on bottom corner of the router. the preset wireless security settings the back of this installation guide. (pushed in). located on the bottom label. Step 6: Open a browser If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. N600 Wireless Router (not included) Laptop or DesktopComputer If the web page doesn’t display close and re-open the browser to in the address bar, or check the Step 5: Connect your computer Use another Ethernet cable to establish a wired connection as shown in this diagram. Power On/Off to the ROUTER ( ). Preset Wireless Security This product has a unique Wi-Fi network name (SSID) and network key (password). The default SSID and network key (password) are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is located on the label on the bottom of the product. NETGEAR recommends that you do not change the preset Wi-Fi network name (SSID) and network key (password). If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: Wi-Fi Network Name (SSID) _______________________________ Network Key (Password ) ________________________________ If you change the preset wireless settings, record it here: Wireless Network Name (SSID) _______________________________ Network Key (Password) _____________________________________ If necessary to retrieve or update your password, type in a Web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work. June 2011 Troubleshooting The browser cannot display the Web page. • Make sure that the PC is connected to one of the four LAN Ethernet ports, or wirelessly to the router. • Make sure that the router is fully up and running. Its wireless LED should turn on. • Close and re-open the browser to make sure that the browser does not cache the previous page. • Browse to • If the PC is set to a static or fixed IP address (this is uncommon), change it to obtain an IP address automatically from the router. Other Features For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: For GNU General Public License (GPL) related information, please visit For additional features, including Live Parental Controls, Traffic Metering, ReadyShare, Guest Access, and others, please log into your router at Download the free NETGEAR Genie Automatica...