Fabricar: NETGEAR Tamaño del archivo: 706.23 kb Nombre del archivo: Idioma del manual:

Enlace gratuito para este manual disponible en la parte inferior de la página

Testing the Path from a Computer to the Internet After verifying that the path between your computer and the wireless router works correctly, test the path from your PC to the Internet. To test the path using ping from a Windows PC: 1. From the Windows task bar, click Start and select Run. 2. In the field provided, type cmd. A command screen will display. 3. At the > prompt, type the following: ping -n 10 where is the IP address of a remote device such as your ISP’s DNS server. 4. Press Enter. If the path is working correctly, replies as in the previous section will display. If you do not receive replies: • Check that your PC has the IP address of your router listed as the default gateway. If the IP configuration of your PC is assigned by DHCP, this information will not be visible in your PC’s Network Control Panel. Verify that the IP address of the router is listed as the TCP/IP default gateway. • Check to see that the network address of your PC (the portion of the IP address specified by the netmask) is different from the network address of the remote device. • If your ISP assigned a host name to your PC, enter that host name as the Account Name in the Basic Settings menu. Troubleshooting Technical Specifications Default Configuration Settings This section provides factory default settings and technical specifications for the Wireless-N 150 Router Model WNR1000v2. Table 3. Home Router Default Configuration Settings Feature Default Setting Router Login Router Login URL routerlogin.net; or Login Name (case sensitive) admin Login Password (case sensitive) password Internet Connection WAN MAC Address Default hardware address (on label) MTU Size 1500 Local Network Router Lan IP address (the Gateway IP address) 192.168.1.1 IP Subnet Mask 255.255.255.0 DHCP Server Enabled Time Zone GMT Time Zone Adjusted for Daylight Saving Time Disabled Firewall Inbound (communications coming in from the Internet) Disabled (bars all unsolicited requests except for traffic on port 80, the http port) Outbound (communications going out to the Internet) Enabled (all) Technical Specifications Table 3. Home Router Default Configuration Settings (continued) Feature Default Setting Wireless Wireless Communication Enabled SSID Name NETGEAR Security Disabled Broadcast SSID Enabled Transmission Speed Autoa Country/Region United States (North America only; otherwise varies by country and region) RF Channel 11 in North America, 13 in most other regions Operating Mode Up to 150 Mbps Data Rate Best Output Power Full a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Networkconditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Technical Specifications Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router’s user name to admin, the password to password, and the IP address to 192.168.1.1. This procedure will erase all the current configuration settings and restore the factory defaults. To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink (see “Back Panel” on page 4). 2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults. Technical Specifications Related Documents This section provides links to reference documents that you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Table 4. Related Documents Document Link Internet Networking and TCP/IP Addressing Preparing a Computer for Network Access Glossary Related Documents Related Documents Registration and Certifications Product Registration, Support, and Documentation Register your product at You must register before you can use our telephone support service. Product updates and Web support are always available by going to: Setup documentation is available on the CD, on the support website, and on the documentation website. When the wireless router is connected to the Internet, click the KnowledgeBase link to view support information or click the Documentation link to view the online User Manual for this wireless router. Maximum Wireless S...

Otros modelos de este manual:
Equipo de red - WNR1000v2 (706.23 kb)

Descargar ahora

Introduzca dos números de la imagen: