Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones NETGEAR XAVB6504 |
Resumen del manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Compatible NETGEAR Powerline Devices . . . . . . . . . . . . . . . . . . 11 Package Contents XAV6504XAV6501Ethernet cables •When you plug in the adapter, the Power LED lights and turns green. If the Ethernet port is inactive for more than 10 minutes, the adapter enters power saving mode and the Power LED turns amber. Power saving mode is disabled by default. •The Ethernet LED lights and turns green when you connect a powered-on Ethernet device to the adapter’s Ethernet port. If the Ethernet LED is off, there is no Ethernet connection. •The Powerline LED lights when the adapter detects at least one other compatible Powerline device. The Pick A Plug features lets you pick the electrical outlet with the fastest link rate: • Green: Link rate > 80 Mbps (fast) • Amber: Link rate > 50 and < 80 Mbps (medium) • Red: Link rate < 50 Mbps (slow) Button Descriptions •Power On/Off switch. Use the Power On/Off switch to turn the device on and off. When this switch is in the Off position, the filtered AC socket still has power. •Factory Reset button. To return your Powerline adapter to its default factory settings, press the Factory Reset button for two seconds, and then release it. •Security button. Use the Security button to secure your Powerline network. For information about securing your Powerline network, see step 2 on page 7. NETGEAR recommends that you secure your Powerline network to protect your personal information and media from unwanted access. 1.Plug each Powerline adapter into a wall outlet. 2.Secure your Powerline network. aMake sure that the Power LED is solid green on each Powerline adapter. bOn the first Powerline adapter, press the Security button for two seconds, and then release the button. The Power LED blinks green while the adapter is setting up security. cWithin two minutes, go to the second Powerline adapter and press its Security button for two seconds, and then release the button. After a few seconds, the security is set and the Power LED turns solid green. The Powerline adapters can communicate over the Powerline network in a secure way. Warning: Do not press the Security button until the Power LED on each adapter is solid green. Pressing this button too soon can temporarily disable Powerline communication. If Powerline communication is disabled, use the Factory Reset button to return the Powerline adapter to its factory settings. 3.Plug the XAV6501 adapter into a wall outlet near your router or gateway. 4.Connect the XAV6501 adapter to the LAN port of the router or gateway using an Ethernet cable. Room A 5.Plug the XAV6504 adapter into a wall outlet where you want to add Internet access. 6.Connect the XAV6504 adapter to an Ethernet-based device using an Ethernet cable. Your Ethernet-based device (computer, game console, set-top box, or Blu-ray player) now has Internet access. Compatible NETGEAR Powerline Devices •For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. •AC input rating (NA): 100–125V, 0.2A (max.); 50–60 Hz excluding socket-outlet rating. •AC input rating (AU, UK, FR, EU): 200–250V, 0.2A (max.), 50–60 Hz excluding socket outlet rating. •XAVB6504 ratings (maximum load): EU: 16A, 250V; UK: 13A, 250V; FR: 16A, 250V; NA: 15A, 125V; AU: 10A, 250V. •Operating temperature: 0–40°C. •Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and product outlet ratings and electrical requirements. •The socket-outlet shall be installed near the equipment and be easily accessible. •Only power cords are allowed to be inserted into the filtered AC outlet; no other equipment with a direct plug-in is allowed. The power cord needs to be a maximum of 1 m long and a minimum of 0.75 mm2 of cross-sectional area. •Do not plug devices that exceed the product ratings into the XAVB6504 filtered AC outlets. The output voltage of the filtered AC outlet is the same as the power outlet that the XAVB6504 adapter is plugged into. To help avoid damaging your system, be sure that the attached devices are electrically rated to operate with the power available in your location. •If the input AC voltage is less than 100 AC, the device plugged into the filtered AC socket of the XAVB6504 adapter might not perform as well as expected. •DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip. The device is not intended to be used with home appliances such as air conditioners, power tools, space heaters, fans, hair dryers, ovens, or refrigerators. Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your produ...