Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
Mobile of time, Router as the unit for an can Introduction Thank you for purchasing the APC 3-in-1 Wireless Mobile Router (Figure 1). This device provides connectivity up to 54 Mbps. It is designed for wireless mobile users needing Internet sharing and networking in mobile and home/small office applications. Wireless LED Power LED Ethernet LED Ethernet Power Mode Selector Switch: Figure 1. APC 3-in-1 Wireless Mobile Router Note: The purchaser must use the APC 3-in-1 Wireless Mobile Router in full compliance with local laws and ordinances and guidelines established by the local service provider. Package Contents • APC 3-in-1 Wireless Mobile Router • 5-Volt, 2-Amp AC/DC Power Adapter • Category 6 (CAT6) Ethernet Cable • Quick Installation Guide. • Documentation CD • Universal Serial Bus (USB) Power Cable Please contact the reseller if any of the listed items are missing from the packaging. Features and Benefits • Internet connection to DSL or cable modem via a 10/ 100 Mbps Ethernet port • IEEE 802.11g and IEEE 802.11b compliant – interoperable with multiple vendors equipment • Provides roaming within 802.11b WAN/LAN environment • Dynamic Host Configuration Protocol (DHCP) for dynamic Internet Protocol (IP) configuration, and domain name forwarding for domain name mapping • Stateful Packet Inspection (SPI) firewall with client privileges, hacker prevention, and Network Address Translation (NAT). NAT also enables multi-user access with a single-user account, and virtual server functionality (providing protected access to Internet services such as Web, File Transfer Protocol (FTP), electronic mail and Telnet) • Virtual Private Network (VPN) support using PPTP, L2TP or IPSec pass-through • Easy setup through a Web browser on any operating system that supports Transmission Control Protocol/ Internet Protocol (TCP/IP) • Compatible with all popular Internet applications • Can be powered using a USB cable or power adapter • Integrates with APC’s TravelPower® Case (Figure 2) and is compatible with APC’s TravelPower Adapter. Note: The TravelPower Case is sold separately and may or may not include the TravelPower Adapter, depending on the model purchased. For more information, go to Wireless Mobile TravelPower TravelPower Router Case Adapter Figure 2. Wireless Mobile Router Connector to APC’s TravelPower Adapter System Requirements To use the Wireless Mobile Router, required system elements are as follows: • A computer that runs a Microsoft® Windows®-based Operating System (OS) or Apple™ Mac™ OS • A Web browser, such as Microsoft Internet Explorer® 5.0 or above, installed on one computer at the site for configuring the APC 3-in-1 Wireless Mobile Router • For wireless LAN connections, each computer must have a wireless network adapter installed • Internet access from your Internet Service Provider (ISP) using a Digital Subscriber Line (xDSL), cable modem, or Large Area Network (LAN) with Dynamic Host Configuration Protocol (DHCP) service (protocol for automating the configuration of computers that use TCP/IP) • TCP/IP network protocol installed on each computer in order to configure the Router or to access the Internet Modes The APC 3-in-1 Wireless Mobile Router functions in the following modes (see the back panel for switch settings): • Access Point (AP) mode (switch position 1) to act as a wireless bridge between an existing LAN and a wireless user. It inherits the profile (security, user, etc.) of the existing LAN • AP/Router mode (switch position 2) to act as a wireless networking device that connects networks by a wireless connection and create specific profiles, such as security and users • Config (Configuration) mode (switch position 3) to connect to the APC 3-in-1 Wireless Mobile Router to change its configuration • Client mode (switch position 4) to convert an Ethernet port to a wireless interface Security Alert: When in a location, such as a hotel or airport, that requires payment to connect to the Internet, APC recommends using “AP/Router” mode (switch position 2) with security set to WEP, WPA, or MAC filtering. These settings help to avoid any unauthorized access and charges. For more information on security and mode selection, see the user’s manual. Installation The Wireless Mobile Router can be powered using a USB cable (Step 1a), or by A/C power (Step 1b). Caution: Connect the APC 3-in-1 Wireless Mobile Router only to the USB port of the APC TravelPower Adapter. Do not connect the APC 3-in-1 Wireless Mobile Router to the USB port of any other device. Failure to comply may result in damage to the device. Step 1a - Connect Power (USB) Power the Wireless Mobile Router using the USB cable (provided), as follows: 1. Connect one end of the USB cable to the APC TravellPower Adapter. 2. Connect the other end of the USB cable to the Wireless Mobile Router. Figure 3. Wireless Mobile Router Connected to APC’s TravelPower Adapter Using a USB Cable Step 1b - Connect Power (Power Adapter) Power the APC 3-in...