Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Check this box to enable the DHCP server on your router. Uncheck to disable this function. Enter the starting and ending IP addresses for the DHCP server’s IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. The length of time for the IP address lease. Enter the Lease time in minutes. Enable this feature to broadcast your DHCP server to LAN/WLAN clients. NetBIOS allows LAN hosts to discover all other computers within the network, enable this feature to allow the DHCP Server to offer NetBIOS configuration settings. Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration. This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated. Enable DHCP Server: DHCP IP Address Range: DHCP Lease Time: Always Broadcast: NetBIOS Announcement: Learn NetBIOS from WAN: NetBIOS Scope: Section 3 - Configuration Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. Enter your WINS Server IP address(es). NetBIOS Node Type: WINS IP Address: Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Enable: Computer Name: IP Address: MAC Address: Clone Your PC’s MAC Address: Add/Update: DHCP Reservations List: Enable: Edit: Delete: Check this box to enable the reservation. Enter the computer name or select from the drop-down menu and click <<. Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. Enter the MAC address of the computer or device. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC Address with the MAC address of your Ethernet card. Click Add/Update to save your entry. You must click Save Settings at the top to activate your reservations. Displays any reservation entries. Displays the host name (name of your computer or device), MAC Address, and IP address. Check to enable the reservation. Click the edit icon to make changes to the reservation entry. Click the trash icon to remove the reservation from the list. DHCP Reservations List Section 3 - Configuration Storage This page will allow you to access files from a USB external hard drive or thumb drive that is plugged into the router from your local network or from the Internet using either a web browser or an app for your smartphone or tablet. You can create users to be allowed to access these files. Enable SharePort Web Access: HTTP Access Port: HTTPS Access Port: Allow Remote Access: User Name: Password: Verify Password: User List: Number of Devices: Check to enable sharing files on your USB storage device that is plugged in your router. Enter a port (8181 is default). You will have to enter this port in the URL when connecting to the shared files. For example: (Enter a port (4433 is default). You will have to enter this port in the URL when connecting to the shared files. For example: (https://192.168.0.1:4433). Check this option the allow remote access to this router. To create a new user, enter a user name. Enter a password for this account. Re-enter the password. Click Add/Edit to create the user. Displays the accounts. The Admin and Guest accounts are built-in to the router. Displays the USB device plugged into the router. Section 3 - Configuration Access Files from the Internet Below are step-by-step instructions on how to access files that are on your USB thumb drive or external hard drive that is connected to your router: Step 1 - Enable SharePort Web Access Check the Enable SharePort Web Access checkbox to enable. Then enter the port(s) for HTTP or HTTPS (secure). The default for HTTP is 8181 and HTTPS is 4433. Step 2 - Create a User Account Under User Creation, enter a username and password, and then click Add/Edit. Step 3 - Configure your Access Path Under User List, click the Modify icon for the user you just created. Here you can browse to the folder on your USB storage device you want to assign the Access Path to. Step 4 - Save Settings If you want to add more users, repeat steps 2 and 3. Once you are finished, click the Save Settings button at the top to save your settings. Note that under the HTTP Storage Link (at the bottom) will display the URL(s) you can use to connect. Also if you selected HTTPS, you must type in HTTPS:// instead of HTTP:// to get a secure connection. For example, if you selected HTTPS and changed the port to 3200, and your WAN IP address is 1.2.3.4, then you would enter HTTPS://1.2.3.4:3200 to connect. Section 3 -...