Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Disclaimer Information in this document is subject to change without notice. The material contained herein is supplied without representation or warranty of any kind. The seller therefore assumes no responsibility and shall have no liability of any kind arising from the supply or use of this document or the material contained herein. Trademarks All trademarks mentioned in this document may be the property of their respective owners. November 3, 2003 Rev.20 Safety Instructions For Installation • Use only the type of power source indicated on the marking labels. • Use only the power adapter supplied with the product. • Do not overload wall outlet or extension cords as this may increase the risk of electric shock. If the power cord is frayed, replace it with a new one. • Proper ventilation is necessary to prevent the product from overheating. Do not block or cover the slots and openings of the device, which are intended for ventilation and proper operation. • Do not place the product near any source of heat or expose it to direct sun light. • Do not expose the product to moisture. Never spill any liquid on the product. • Do not attempt to connect with any computer accessory or electronic product without instructions from qualified service personnel. This may result in risk of electric shock. • Do not place this product on an unstable stand or table. For Using • Power off and unplug this product from the wall outlet when it is not in use or before cleaning. Pay attention to the temperature of the power adapter. The temperature may be high. • After powering off the product, power on the product at least 15 seconds later. • Do not block the ventilating openings of this product. • When the product is not in use for a period of time, unplug the power cord of the product to prevent it from damage of storm or sudden increase in ratings. For Service Do not attempt to disassemble or open the cover of this unit yourself. You should not attempt to service the product yourself, which may void the user’ s authority to operate it. Contact qualified service personnel under the following conditions: • If the power cord or plug is damaged or frayed. • If liquid has been spilled into the product. • If the product has been exposed to rain or water. • If the product does not operate normally when the operating instructions are followed. • If the product has been dropped or the case has been damaged. • If the product exhibits a distinct change in performance. FCC Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. About This User Manual For brevity, throughout this manual the “Wireless Broadband Router” is referred to as “the router” or “the device” and following terms or abbreviations are used interchangeably: · Access Point – AP · Wireless LAN – WLAN · Ethernet network – LAN – network Note and Caution in this manual are highlighted with graphics as below to indicate important information. Contains related information that corresponds to a topic. Note Caution Represents essential steps, actions, or messages that should not be ignored. This User Manual contains information on how to install and configure your Wireless Broadband Router to get your network started accessing the Internet. It will guide you through the correct configuration steps to get your device up and running. Contents 1 Introduction ................................................. 1 1.1 Overview.......................
Otros modelos de este manual:Equipo de red - RT210W (756.52 kb)
Equipo de red - RT210W (756.52 kb)
Equipo de red - RT210W (756.52 kb)
Equipo de red - RT210W (756.52 kb)