Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2002 Dell Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, Dell OpenManage, PowerEdge, and PowerVault are trademarks of Dell Computer Corporation; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. August 2002 P/N 1K780 Rev. A04 This document provides information for installing and connecting peripheral hardware components to your Dell™ PowerEdge™ Cluster SE400 and SL400 systems. The configuration information in this document is specific to Microsoft® Windows NT® Server 4.0, Enterprise Edition and Windows® 2000 Advanced Server operating systems. This document provides the following information: • PowerVault™ and PowerEdge systems that support Cluster SE400 and SL400 cluster configurations • PowerEdge systems that work together in a Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server cluster configuration • PCI slot information for installing Dell OpenManage™ Remote Assistant Card II (DRAC II cards), Dell Remote Access Card III (DRAC III cards), NICs, and RAID controllers in your cluster nodes NOTE: Configurations not listed in this document are not certified or supported by Dell or Microsoft. Supported Cluster Configurations Table 1-1 provides a list of supported cluster configurations for the Cluster SE400 and SL400 running Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. Table 1-1. Supported Cluster Configurations PowerEdge Cluster Supported PowerEdge Systems Supported PowerVault Storage Systems Supported Cluster Interconnect (for the Private Network) SE400 1550, 1650, 2400, 2450, 2500, 2550, 220S and 221S Any supported NIC 2600, 2650, 4400, 4600, 6400, 6450, 6600, 6650, and 8450 SL400 1550, 2400, 2450, 220S and 221S Emulex cluster local area 2500, 2550, 4400, 6400, 6450, and 8450 network (cLAN) high performance, low-latency host adapter Platform Guide | support.dell.com Rules and Guidelines When configuring your cluster, both cluster nodes must contain identical versions of the following: • Operating systems and service packs • Hardware drivers for the NICs, RAID controllers, and any other peripheral hardware components • Management utilities, such as Dell OpenManage systems management software Obtaining More Information See the section related to your cluster product for more information on supported configurations. See the Dell PowerEdge Cluster SE400 and SL400 Installation and Troubleshooting Guide for a detailed list of related documentation. Windows NT Server 4.0, Enterprise Edition and Windows 2000 Advanced Server Cluster Configurations This section provides information on PowerEdge cluster configurations for your Cluster SE400 and SL400 running the Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server operating system. Your Cluster SE400 and SL400 supports PowerEdge systems as cluster nodes in identical systems running Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. Table 1-2 provides a list of PowerEdge systems that work together in SE400 or SL400 cluster configurations. Table 1-2. PowerEdge Cluster Node Configurations 1550 1650 24xx 25xx 26xx 4400 4600 64xx 66xx 8450 1550-1650-2400-2500-2600-4400-4600-6400-6600-84501550 1650 2400 2500 2600 4400 4600 6400 6600 8450 2450-2550-2650-6450-66502450 2550 2650 6450 6650 NOTE: The PowerEdge 1650, 2600, 2650, 4600, 6600, and 6650 systems are not supported in the SL400 configurations. 1-2 Platform Guide Service Pack Support Windows NT Server 4.0 Service Pack 6a (SP6a) or later is recommended for Cluster SE400 and SL400 systems. Windows 2000 Advanced Server Service Pack 2 (SP2) or later are recommended for Cluster SE400 and SL400 systems. You can download the latest service pack from the Microsoft website located at See the Dell PowerEdge Cluster SE400 and SL400 Installation and Troubleshooting Guide for instructions on installing the service pack. Installing Peripheral Components in Your PowerEdge Cluster Node PCI/PCI-X Slots This section provides configuration information for adding NICs, a DRAC II or III, and RAID controllers into your cluster node PCI/PCI-X slots. Installing the PERC 3/DC You must install the PERC 3/DC RAID controller in a 64-bit PCI/PCI-X slot up to 133 MHz or a 32-bit, 33-MHz PCI slot. See the...
Otros modelos de este manual:Equipo de red - SL400 (781.56 kb)