|
Otros manuales para este modelo:
Resumen del manual
1 HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver for HP-UX
11i v2
What’s in This Release Notes
This document discusses the most recent product information pertaining to FibrChanl-00 (td)
HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Version 11.23.0809, which is provided with
HP-UX 11i v2. The td driver supports the following Fibre Channel products:
•
A6795A PCI Tachyon XL2 Adapter
•
A5158A PCI Tachlite TL/TS Adapter
HBAs Not Supported on HP-UX 11i v2
The following Fibre Channel products are not supported
on HP-UX 11i v2:
•
A6684A HSC-eff Tachlite Fibre Channel Adapter
•
A6685A HSC Tachlite Fibre Channel Adapter
Compatibility Information and Installation Requirements
Software Requirements
The FibrChanl-00 (td) version B.11.23.0809 for HP-UX 11i v2 (or later) must be installed before
installing A5158A or A6795A host-bus adapters (HBAs) on a system.
You can download the driver bundles from the HP Software Depot at:
http://www.hp.com/go/softwareinfo/SUPPORT_PLUS
Defects Fixed in This Version
The following defect fixes are included in the B.11.23.0809 version of the FibrChanl-00 (td) driver
in the HP-UX 11i v2 September 2008 release. To view the details of each defect fix, see the HP IT
Resource Center website at:
http://itrc.hp.com
Table 1-1 Defect Fixes
Number
Description
QXCR1000823042
SNIA HBA library API HBA_GetFcpTargetMapping() is taking longer time to
obtain the FCP target mapping details if the hosts have many LUN's in NO_HW state.
Fix has been done to ignore the LUN's in NO_HW states from further processing.
QXCR1000749444
The configuration file /etc/hba.conf in HP-UX SNIA Common HBA library has
been modified to enable support for HP's vendor-specific implementation of SNIA
APIs for the Fibre Channel (fclp) driver.
Verifying installation of the HP PCI Tachyon TL/TS/XL2 Fibre Channel
Driver
To verify whether the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully
on your system, enter the following command at the HP-UX prompt:
# swlist FibrChanl-00
Where:
FibrChanl-00
is the bundle name for the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver.
If the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully on the system,
the following message is displayed:
What’s in This Release Notes
5
...Otros modelos de este manual:
Equipo de red - HP-UX 11i v2 I/O Cards (179.21 kb)