Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario HP, modelo HP Gigabit Ethernet and 100Base-T Cards

Fabricar: HP
Tamaño del archivo: 129.65 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


Table 2 HP-UX 11i v3 March 2011 fixes — IEther-00 B.11.31.1103 (continued)
SR number
Description
QXCR1001063280
The command nwmgr -s -A all --sa --fr current -c lan on a PCIe
interface controlled by the iether driver fails with the following error message: New
512byte transmit buffer size limit = ERROR: Unsupported attribute.
QXCR1001062969
Typo error in the nwmgr_iether(1M) man page.
QXCR1001075909
When a guest vNIC is created over the iether interface, the iether driver holds lock too
long during AVIO packet processing. This causes an HPVM host panic.
QXCR1001075915
When a guest vNIC is created over the iether interface, the iether driver receives packets
from AVIO guest and handles reset request from the AVIO guest simultaneously. Due to a
problem in the locking mechanism, interface pointers can be reset to null, which causes an
HPVM host panic.
QXCR1001082383
When a guest vNIC is created over the iether interface, HPVM guests with AVIO networking
receive duplicate multicast and broadcast packets from host.
4 Known problems and limitations
No known problems were identified for this version of IEther-00 at the time of this publication.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.

For specific installation instructions, see the installation procedure or overview document for
your card.

For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v3 (B.11.31).
5.2 Hardware requirements
This version of IEther-00 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v3 (B.11.31)
operating system.
6 Related information
The latest documentation for Ethernet cards is available in English at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs
Documents are organized as follows:

Installation guides are listed alphabetically in the “Setup and install — general” section.

Release notes are listed alphabetically in the “Getting started” section.

Support guides are listed alphabetically in the “User guide” section.

Support Matrix documents are listed alphabetically in the “General reference” section.
7 Software availability in native languages
The IEther-00 product is available only in the English language.
4


...

Otros modelos de este manual:
Equipo de red - HP-UX 11i v3 I/O Cards (129.65 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría