Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and PROFILE MANAGER TAB.......................................................................................25 .............................................................................................29 INFORMATION TAB ...............................................................................................26 ABOUT TAB ..........................................................................................................28 UNINSTALLATION You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers via a wireless LAN. The Access Point Network The network installation allows you to share files, printers, and Internet access much more conveniently. With Wireless LAN Cards, you can connect wireless LAN to a wired global network via an Access Point. LED Indicators For Airlive WL-8000PCM Power Indicator: (Orange LED) The power LED will appear as solid orange when the Wireless PC card is connected with an AP. If the Wireless PC card is not connected with an AP, the power LED will be blank. Act Indicator: (Green LED) The Act LED will be blinking green when transmitting/receiving wireless data. 7. Follow the instruction to select the program folder. Click Next to continue. 9. Select Yes, I want to restart my computer now and click Finish to complete the software installation. Install the device 1 Note: Make sure the procedures in “Install Driver & Utility” has been performed. 1. If you are using the WL-8000PCI Card, before installing the device, make sure the computer is turned off. Remove the expansion slot cover from the computer. For Wireless CardBus users, please locate your CardBus slot. 2. Carefully slide the Airlive WL-8000PCM/PCI into the PCI/CardBus slot. Push evenly and slowly and ensure it is properly seated. For WL-8000PCI, you may have to use the mounting screw to have the card screwed securely in place. 3. After the device has been connected to your computer, turn on your computer. Windows will detect the new hardware and then automatically copy all of the files needed for networking. Recover your expansion slot cover if you are using the Wireless PCI Card. Note for Windows 98 users: Before installation of the device, make sure you have your operating system CD-ROM at hand. You may be asked to insert the OS CD-ROM in order to download specific drivers. If you are using the WL-8000PCI, the product descriptions shown on the screen will differ from the illustrations shown in this document. Please discard the discrepancy and follow the installation procedures to continue anyway. If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided by Microsoft. 3. Next, highlight the specific network component you need, click Add. 4. Highlight Microsoft, and then double click on the item you want to add. Click OK. After returning to the Network screen, you can make your computer is visible on the network by enabling the File and Print Sharing. 5. Click the Identification tab. Enter a name that is unique on the network. Type the name of your workgroup, which should be the same name used by all of the other PCs on the network. 6. Click the Access Control tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share level can be set to “User-level access control.” 4. Select the network protocol you wish to add and click OK. This will return you to the Local Area Connections Properties window. 5. To allow your computer to be visible on the network, make sure you have checked off the File and Printer Sharing for Microsoft Networks. 6. When finished, you must restart your computer to complete the installation. CONFIGURATION After successful installation of the WL-8000PCM/PCI’s driver, the utility icon will display in the task bar. You will be able to access the Configuration Utility through the Network Status icon. If the icon doesn’t appear automatically, go to Start .. Programs .. Wireless LAN Utility .. Wireless LAN Utility, it will appear in the task bar. Accessing the Configuration Utility All settings are categorized into 4 Tabs: Main Tab Profile Manager Tab Information Tab About Tab Note:Only one configuration utility can be active at a time. When the ZCU is set to be the active utility, opening the TI utility-by double-clicking on the utility icon in the system tray or right-clicking the icon and selecting Open-launches the ZCU inserted of the TI utility. Configure using Windows Zero Config. External Configuration Checkbox (Windows XP only): A checkbox that enables you to disable the WLAN Station Configuration Utility and indicates that the station driver is to be configured with Windows XP’s built-in Zero Configuration Utility (ZCU). On Windows XP systems, the ZCU service is automatically stopped w...