Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Note: Refer to the SPIM or the Service User’s Guide shipped with the service processor, verify that the code is at EC H10000A or above. Use the procedure Displaying the EC Level of the Code installed on the hard disk. If the EC of the code installed is prior to H10000A, use the installation instructions to install the new level of code shipped. FFBM PN 42L2445 3 of 10 EC F52322 09 Oct 1998 EC F12701A 14 DEC 1998 EC F70078 22 APR 1999 EC F70110 20 JAN 2000 EC H10024 08 MAR 2001 Installation Instructions 2.2 Concurrent ECs (Must be installed together) None. 2.3 Companion ECs (May be installed together) None. 3.0 BMs to Be Installed Feature B/M Title 10K8798 Network Node Processor B (NNP-B) Feature Code 5425 4.0 Preparation 1. Familiarize yourself with the purpose and details of the installation instruction before negotiating machine time with the customer. 2. Check all items listed on the BMs to determine that all parts have been received. Refer to Chapter 1 in the Network Node Processor Installation and Maintenance (Based on 6578), GY27-0407. 3. The set up of the NNP-B has no impact on customer operations. 4. Obtain from the customer the Parameter worksheet. 5.0 Programming None. 6.0 Purpose and Description 6.1 Purpose To increase the reliability of the 3746-9X0 by adding a backup NNP. 3746 PN 42L2445 EC F52322 EC F12701A EC F70078 EC F70110 EC H10024 FFBM 4 of 10 09 Oct 1998 14 DEC 1998 22 APR 1999 20 JAN 2000 08 MAR 2001 Installation Instructions 6.2 Description The installation of the NNP-B is divided into two main steps: 1. Installing the 6578-RAU system unit. 2. Loading the code on the NNP-B. Note: These steps are documented in the Network Node Processor Installation and Maintenance (Based on 6578), GY27-0407. FFBM PN 42L2445 5 of 10 EC F52322 EC F12701A EC F70078 EC F70110 EC H10024 09 Oct 1998 14 DEC 1998 22 APR 1999 20 JAN 2000 08 MAR 2001 Installation Instructions 7.0 Installation Time FFBM Machine Hrs. System Hrs. Nbr of CEs 10K8798 0.2 0.0 1 Note: To reduce the MES installation time it is recommended that you load the Network Node Processor Code on the Service Processor and install the system unit at the same time. No impact on 3745 customer operations. 8.0 Tools/Material Required None. Installation (Steps 9-12) 9.0 Safety Review the Safety Notices and the Safety Inspection Procedures located at the beginning of the IBM 3745 Communication Controller All Models, IBM 3746 Expansion Unit Model 900, IBM 3746 Nways Multiprotocol Controller Model 950 Safety Information, GA33-0400. 10.0 Details of Installation 10.1 Installing and Connecting the NNP Note: For any unexpected message or error concerning the NNP-B, go to the chapter Problem Determination of the Network Node Processor Installation and Maintenance (Based on 6578), GY27-0407. 1. Using the Network Node Processor Installation and Maintenance (Based on 6578), GY27-0407, go to Chapter 1 and install the NNP following the instructions to install a NNP-B. When completed go to next step. 2. Ask the customer for a maintenance window on 3746-900 with traffic deactivated. FFBM PN 42L2445 6 of 10 EC F52322 09 Oct 1998 EC F12701A 14 DEC 1998 EC F70078 22 APR 1999 EC F70110 20 JAN 2000 EC H10024 08 MAR 2001 Installation Instructions 10.2 Enabling the NNP Back-Up Function Important It's a customer task, but ask the customer if he wants you to perform this task. 1. On the 3746-9X0 main menu, Click on Network Node Processor Management. 2. Double click on Manage Control Point on NNPs. 3. Click on Enable the CP/NNP back-up. 4. Click on Close to exit from the function. Note: For details refer to chapter Working with the NNP Functions on the 3746-950 User's Guide, SA33-0356, or the 3745-17A to 61A and 3746-900 Basic Operation Guide, SA33-0177. FFBM PN 42L2445 7 of 10 EC F52322 EC F12701A EC F70078 EC F70110 EC H10024 09 Oct 1998 14 DEC 1998 22 APR 1999 20 JAN 2000 08 MAR 2001 Installation Instructions 10.3 Logging Off the MOSS-E 1. On the 3746-9x0 Menu window, click on Function, then click on Exit. 2. On the MOSS-E View window, click on Program. 3. Click on LOG OFF MOSS-E. 4. Close the front and rear doors of the controller expansion. 10.4 Returning the Machine to the Customer Inform the customer that the NNP backup is installed and operational. 11.0 Test Procedures No test required. 12.0 Field Updating None. After Installation (Steps 13-15) 13.0 Field Updating None. 14.0 Publications Update None. 15.0 Parts Disposition FFBM PN 42L2445 8 of 10 EC F52322 09 Oct 1998 EC F12701A 14 DEC 1998 EC F70078 22 APR 1999 EC F70110 20 JAN 2000 EC H10024 08 MAR 2001 Installation Instructions 15.1 Purchased Machines Refer to the parts ownership matrix to determine the correct owner of removed/unused parts. . For EMEA/APG/AG Areas, refer to Hardware and General Service Code Description. . For Domestic Areas, return parts to the customer. 16.0 Machine Records . Install the new MACHINE HISTORY supplied. . Report installation and quality problems using existing procedures. End of ins...