Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Camarillo, CA 93011 ® Copyright © 1999 by Harbor Freight Tools®. All Rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For Technical Questions and replacement parts, please Call 1-800-444-3353 Please visit our WebSite at Specifications Voltage & Watts 110 volts, 850 watts, 60Hz, Single Phase Amps 6 amps / no load 2.0 / with load 2.5 / start up 3.6 RPM 2 Speeds (2800 / 3300) Arbor diameter 7/8” Spindle thread 5/8” – 11 Wheel diameter 6 – 3 / 4” Warning!!! Read all instructions before charging or operating the tool. Save This Manual. You will need it for safety guidelines, operating instructions, and parts list. Keep your invoice with this manual and record your invoice number here _________________________ for future reference. Rules For Safe Operation Work Area 1. Keep Work Area Clean. Cluttered areas invite accidents. 2. Consider Work Environment. Do not use power tools in damp or wet locations. Do not expose to rain. Do not use tools in presence of flammable liquids or gases. 3. Keep Children Away. All children should be kept away from work area. Do not let them handle tools or electrical cords. 4. Store Idle Equipment. When not in use store tools in a high, dry, locked location. Personal Safety 5. Dress Properly. Do not wear loose clothing or jewelry that can be caught in moving parts and cause personal injury. Wear protective hair covering to protect long hair. Rubber gloves and non skid footwear are recommended when working outdoors. 6. Protect Your Eyes, Ears, and Lungs. Wear safety glasses. Wear a dust mask. Use a full face mask if you are producing metal filings or wood chips. Wear hearing protection during extended periods of operation. Safety equipment is available at Harbor Freight Tools. 7. Stay Alert. Concentrate on what you are doing. Use common sense. Do not operate while under the influence of drugs or alcohol. Read warning labels on prescription medication to determine if the medication will impair your judgment or reflexes. #41213 8. 8. 9. Disconnect Tools. Disconnect tools when not in use. 10. Do Not Overreach. Keep proper footing and balance at all times. Do not reach over machines that are running. 11. Avoid Accidental Starting. Never carry a power tool with a finger on the trigger. Tool Care And Use 12. Check For Damaged Parts. Before using a tool check for damaged parts. If found, determine whether or not the tool will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of moving parts, mounting, or any other condition that might affect operation. Any damaged part should be serviced or replaced by an authorized service center, unless otherwise stated elsewhere in this manual. Do not use the tool if switch does not turn on and off properly. 13. Maintain Tools With Care Follow instructions for lubricating or changing accessories. Inspect tool or charger cords before using. If a cord is damaged have it repaired by an authorized service center. Keep handles dry, clean, and free from oil and grease. 14. Secure Work. Use clamps or a vise to hold your work. It is safer than using your hands and frees both hands to operate the tool. 15. Do Not Force The Tool. It will do a better job and be safer to operate when used at the rate it was designed for. 16. Use The Right Tool. Do not force a small tool or attachment to do the work of a larger, heavy duty tool. Do not use the tool for a purpose for which it was not intended. 17. Replacement Parts And Accessories. When servicing use only identical replacement parts or accessories. Approved parts and accessories are available at Harbor Freight Tools. Voltage Warning Before connecting any power tool to a power source (receptacle, outlet) make sure the voltage supplied is the same as specified on the name plate on the tool. A power source with a voltage greater than specified on the tool can result in SERIOUS INJURY to the user, and damage the tool. If in doubt, DO NOT PLUG IN THE TOOL and ask a qualified, certified technician. Extension Cords An extension cord should not be used unless absolutely necessary. Make sure that the pins on the plug of the extension cord are the same number, size and shape as those on the tool. If an extension cord is to be used outdoors, make sure that it is designated W-A on the cord jacket. Round jacketed extension cords listed by Underwriters Laboratory (UL) are preferable. AMP RATING TOTAL EXTENSION CORD(S) LENGHT IN FEETA W G 25 50 75 100 125 150 175 200 0-10.0 18 18 16 16 14 14 12 12 10.1-13.0 16 16 14 14 14 12 12 12 13.1-15 14 14 12 12 12 12 12 -15.1- 18 12 12 12 12 12 12 --- #41213 REV 06/05 Assembly IMPORTANT Carefully inspect the condition of the accessory before use and check the accessory continually during use. If any damage is noted, stop immediately and replace the accessory with an undamaged on...