Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Wear the appropriate protection during use! Functional Overview A pneumatic sanding drum mounted to a buffer allows for easy and smooth sanding of contours and curves. The inflatable bladder provides for easy changes of the replaceable sanding sleeve and also allows for fine-tuning of the overall flexibility of the drum for sanding compound curves and contoured surfaces. By increasing the pressure in the drum, a user can create a more rigid surface for sanding shallow contours. Similarly, by decreasing the pressure, a user can soften the surface of the drum, allowing it to "wrap-around" workpieces with tighter curves. Completely releasing the pressure decreases the diameter of the drum so the sanding sleeve can be removed and replaced. Specifications Bore Diameter..................................................1" Length...............................................................6" Diameter: G1970........................................................3" G1971........................................................4" G1972........................................................6" Air Inlet Type...............................Schrader Valve Maximum Pressure..................................10 PSI Inflation Method....................Manual Pump Only Inventory A. Pneumatic Sanding Drum..........................1 B. Sanding Sleeve..........................................1 Figure 1. Model G1972. COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #JB10527 PRINTED IN TAIWAN Operation 1. DISCONNECT BUFFER FROM POWER! 2. Install the sanding drum on the buffer shaft using the spacers and flanges included with the buffer (Figure 2). Replacement Sanding Sleeves G1973 3" x 6" x 100 Grit Silicon Carbide G1974 3" x 6" x 150 Grit Silicon Carbide G1975 4" x 6" x 100 Grit Silicon Carbide G1976 4" x 6" x 150 Grit Silicon Carbide G1977 6" x 6" x 100 Grit Silicon Carbide G1978 6" x 6" x 150 Grit Silicon Carbide 3. Slide the sanding sleeve over the sanding drum. Parts Breakdown & List 4. Use a bicycle pump (or other manual pump) MODEL REF PART # DESCRIPTION to inflate the drum until the sanding sleeve is G1970 1 P1970001 RUBBER DRUM 3" secure. Do not exceed the 10 PSI maximum 2 P1970002 VALVE STEM rating. 3 PFH08 FLAT HD SCR 10-24 X 1/2 4 P1970004 10 PSI MAX. LABEL 5 P1970005 AIR COMPRESSOR LABEL Awarning G1971 1 P1971001 RUBBER DRUM 4" EXPLOSION HAZARD! 2 P1971002 VALVE STEM N I? J ■< 3 PFH08 FLAT HD SCR 10-24 X 1/2 /Sу** ** Do not use an air compressor 4 P1970004 10 PSI MAX. LABEL I%v3> to inflate the sanding drum! 5 P1970005 AIR COMPRESSOR LABEL Over-inflation will cause the 1 Ç bladder to explode, resulting in personal injury and/or tool damage G1972 1 P1972001 RUBBER DRUM 6" 2 P1972002 VALVE STEM 3 PFH08 FLAT HD SCR 10-24 X 1/2 4 P1970004 10 PSI ...
Otros modelos de este manual:Máquinas de rectificar - G1870 (319.33 kb)
Máquinas de rectificar - G1972 (319.33 kb)