Iniciar sesión:
Votos - 5, Puntuación media: 3.8 ( )

Manual de usuario Fujitsu Siemens Computers, modelo Docking Station PenCentra 200

Fabricar: Fujitsu Siemens Computers
Tamaño del archivo: 32.96 kb
Nombre del archivo: handstrap-pc200.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


To install the hand strap, 1. Using a sharp object such as a penknife, pry the round, adhesive covers from the back of the system to expose the screw bosses in the location that you want to install the hand strap. See Figure 1 for the screw boss locations. Figure 1. Hand Strap Fastening Points 2. Use the screws provided to attach the hand strap in the desired location as shown in Figure 2. 3. The hand strap is now attached to your system. Using the Hand Strap 4. If you are a right-handed user, install and use the hand strap as shown in Figure 3. The Velcro strip on the hand strap allows you to adjust the strap to the most comfortable position. If you are a left-handed user, install and use the hand strap as shown in Figure 4. FUJITSU Figure 2. Installing the Hand Strap Figure 3. Using the Hand Strap (Right-handed User) Figure 4. Using the Hand Strap (Left-handed User) 6/00 PenCentra 130 and PenCentra 200 are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation 58-0687-00B...

Otros modelos de este manual:
Máquinas de rectificar - PenCentra PenCentra 130 (32.96 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría