Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
à-w ® MODEL G1600 PNEUMATIC SANDING DRUM FOR MODEL G1495 INSTRUCTIONS Awarning EYE INJURY HAZARD! Always wear safety glasses during use to prevent serious personal injury. 1 \/T ** (. * 10 PSI MAX AIR PRESSURE! Exceeding this PSI may result in injury/tool damage. (©) RESPIRATORY HAZARD! Sanding produces fine dust. Wear the appropriate protection during use! Functional Overview A pneumatic sanding drum mounted to a lathe allows for easy and smooth sanding of contours and curves. The inflatable bladder provides for easy changes of the replaceable sanding sleeve and also allows for fine-tuning of the overall flexibility of the drum for sanding compound curves and contoured surfaces. By increasing the pressure in the drum, a user can create a more rigid surface for sanding shallow contours. Similarly, by decreasing the pressure, a user can soften the surface of the drum, allowing it to "wrap-around" workpieces with tighter curves. Completely releasing the pressure decreases the diameter of the drum so the sanding sleeve can be removed and replaced. Specifications Mounting Bore..............................1" x 12 TPI LH Length...............................................................6" Diameter...........................................................4" Air Inlet Type...............................Schrader Valve Maximum Pressure..................................10 PSI Inflation Method....................Manual Pump Only Inventory A. Pneumatic Sanding Drum..........................1 B. Sanding Sleeve..........................................1 Figure 1. Model G1600. Replacement Sanding Sleeves G4387 4" x 6" x 60 Grit Silicon Carbide G4388 4" x 6" x 80 Grit Silicon Carbide G1975 4" x 6" x 100 Grit Silicon Carbide G4389 4" x 6" x 120 Grit Silicon Carbide G1976 4" x 6" x 150 Grit Silicon Carbide COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #JB10532 PRINTED IN TAIWAN Operation 1. DISCONNECT LATHE FROM POWER! 2. Install the sanding drum on the lathe spindle using the adapter included with the lathe (Figure 2). 3. Slide the sanding sleeve over the sanding drum. 4. Use a bicycle pump (or other manual pump) to inflate the drum until the sanding sleeve is secure. Do not exceed the 10 PSI maximum rating. ▲WARNING N [If ^ EXPLOSION HAZARD! Do not use an air compressor ^Vv- to inflate the sanding drum! Over-inflation will cause the bladder to explode, resulting in personal injury or tool damage Operation Tips • Adjust the pressure in the drum to fine-tune the firmness of the drum for sanding contours. • Always hold the workpiece firmly—the soft surface of the drum will exert more force on the workpiece than a traditional sanding drum. • Deflate the drum when not in use. Parts Breakdown & List REF PART # DESCRIPTION 2 P1600002 RUBBER DRUM 4" 3 P1600003 VALVE STEM 4 PWS002 WOOD SCREW #10 X 1/2 5 P1970004 10 PSI MAX. LABEL 6 P1970005 AIR COMPRESSOR LABEL If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663. -2- G1600 Pneumatic Sanding Drum For G1495...