Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
ESR-2400A 1 2 8 9 10 11 240V 50Hz • 2400W RYOBI AUSTRALIA. ESR-2400A 1 2 8 9 10 11 - 1 - 2 -- 2 - EnglishEnglish GENERAL SAFETY RULES CAUTION! Read and understand these instructions. When using garden tools observe them to protect against electric shock, risk of fire and serious injury. Read these instructions before using the shredder and keep them in a safe place for future reference. Keep work area tidy Cluttered work areas increase the risk of accident and injury. Keep the work area that is to be used clear of clutter. Consider the work environment Keep work area well lit. Do not expose tools to rain. Do not use tools in damp or wet location. Do not use the tools in the presence of flammable liquids or gases. Gaurd against electric shock Avoid body direct contact with earth or ground surfaces. Keep away from children Children under 16 years of age should not operate the shredder. The operator shall be responsible for the safety of person in the operating zone of the shredder. Personal safety Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tools while tired or under the influence of drugs, alcohol or medication. Store tools in a secure place When not in use, tools should be stored in a dry, high or locked-up place, out of reach of children. Dress properly Rubber gloves and non-skid footwear are recommended when working outdoors. Do not wear loose clothing or jewelry. Contain long hair. Do not operate the shredder without the hopper. When starting up or switching on the motor, the feeding device and discharge chute shall be in the closed position. Never reach into the shredder when it is running or plugging in. Make sure the shredder is standing on a level and a firm base and will not topple over. Do not overreach Keep proper footing and balance at all times. Before leaving the shredder, it shall be switched off. The shredder should be assembled in accordance with the instruction manual before switching on. Maintain tools with care. Keep the blades sharp and the exit shoot clean for better and safer performacnce. Follow instructions for changing accessories. Do not use the shredder if it is damaged in anyway. Inspect power leads and cords Inspect the plug and cord each time when the shredder is used. If damaged, have it repaired at an authorized service centre. Inspect extension cables regularly for signs of damage or aging. Replace if damaged. The shredder should not be used if the condition of the connection cord is not satisfactory. Check damaged parts Before further use of the tool, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, breakages of parts, mounting and any part that is damaged should be properly repaired or replaced at an authorized service centre unless otherwise indicated in the instruction manual. Have defective switches replaced at an authorized service centre. Do not use the tool if the switch does not turn it on and off. Stay alert Watch what you are doing. Use common sense. Do not operate the shredder when tired. Warning! The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury. Have the shredder repaired by a qualified service centre. This shredder is constructed inaccordance with the relevant safety requirements. Repairs should only be carried out by qualified service centre using original spare parts, otherwise this may result in considerable danger to the user. - 3 English SYMBOLS English SYMBOLS Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool more safely and effectively. SYMBOL NAME EXPLANATION Safety Alert Precautions that involve your safety. Ricochet Thrown objects can cause severe injury. Wear protective clothing and boots. Eye Protection Always wear safety goggles or safety glasses with side shields and a full face shield when operating this product. 50' 15m Keep Bystanders Away Keep all bystanders at least 50 ft. (15 m) away. No Blade Do not install any type of blade on this product. Class II Construction Double-insulated construction. Wet Conditions Alert Do not expose to rain or use in damp locations. Read Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (W...