Votos - 2, Puntuación media: 4 ( )

Fabricar: ABC Office Tamaño del archivo: 210.73 kb Nombre del archivo: Idioma del manual:

Run a fine stream of lubricant from one side of the feed opening to the other. Run the shredder in REVERSE for a few seconds to help distribute the lubricant evenly. You can now continue shredding as usual. DAHLE Shredder Oil is the only lubricant you should use in your paper shredder. It has been specially formulated so as not to leave any residue that could attract dust and clog the shredding mechanism. You can order DAHLE Shredder Oil ( item # 740) from your local dealer. Repairs on your paper shredder should only be performed by qualified technicians. If you need service, contact your local dealer. NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED (text) abcoffice (text) (800) 658-8788 SAFETY INSTRUCTIONS • Read the operating instructions carefully before operating your shredder! • Do not use in the vicinity of flammable liquids or gases. • Do not use in the vicinity of corrosive materials. • Do not expose to water or wet conditions. • Do not let children operate this, or any other, office equipment. • Do not reach into the cutting mechanism during operation - not even from the top or with objects. • Do not operate the shredder for a period of more than 5 minutes in no- load operation ( operation without paper) . • Keep hair clear of machine. • Keep neckties clear of machine. • Keep bracelets, or any other jewelry, clear of machine. • Power connection must be accessible at all times. • Disconnect from power supply before servicing. • The safety devices must not be disabled or removed. • Please make sure that the shredder gets sufficient ventilation ( ventilating grills must kept free) . BEFORE YOU SHRED • Remove Transport Bolts with wrench provided. • Record the Model and Serial Number in the space provided inside the front cover. • Be sure the electrical outlet provides the proper power for your shredder ( see rating label on rear of shredder) . • Install Shred Bag ( see: “ CHANGING THE SHRED BAG” ) . TURNING ON YOUR SHREDDER 20801 S • •••• 20801 C 1. ON, OFF and REVERSE are controlled by the black Rocker Switch ( 8a) on the top of the shredder. 2. Moving the switch to the “ I” ( ON) position activates the shredding mechanism. 3. Moving the switch to the center or “ O” ( OFF) position turns the shredder off. 4. The REVERSE position “ R” will be discussed in “CLEARING A PAPER JAM” . ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME 20800 EC • •••• 20814 • •••• 20822 EC • •••• 20830 EC • •••• 20831 EC • •••• 20835 EC 1. ON/OFF is controlled by the green push button ( 8) found on top of the shredder. 2. Pressing this button turns the shredder on and places it in the stand- by mode. 3. Pressing the button again turns the shredder off. SHREDDING 20801 S • •••• 20801 C Turn shredder on. Insert paper squarely into Feed Opening ( 3) . Continue feeding paper into Feed Opening until the shredding mechanism begins to draw the paper in. At this point, allow the paper to feed into shredder on its ...

Descargar ahora

Introduzca dos números de la imagen: